Shear-Coaxial Jets from a Rocket-Like Injector in a Transverse Acoustic Field at High Pressures
نویسندگان
چکیده
Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 13-12-2005 2. REPORT TYPE Technical Paper 3. DATES COVERED (From To)
منابع مشابه
Rocket Combustion Properties for Coaxial Injectors Operated at Elevated Pressures
A new facility has been built at the University of Michigan to study shear coaxial combusting gas-gas injection in a rocket combustion chamber. This facility, capable of chamber pressures of 10 atmospheres, is used to obtain a better understanding of the complex fluid dynamics and combustion processes found in rocket combustion chambers and to provide data to assess NASA’s computational fluid d...
متن کاملX-ray Radiography Measurements of Shear Coaxial Rocket Injectors
Shear coaxial injectors are a common injector type for liquid-rocket-propulsion applications and can be found in many oxygen/hydrogen engines. These injectors rely on the shear between an outer lower-density, high-velocity annulus and a higher-density, low-velocity inner jet to atomize and mix the propellants. Because of the dense-jet core, the optical densities of these sprays are high, partic...
متن کاملFlow and Atomization Characteristics of Cryogenic Fluid from a Coaxial Rocket Injector
Title of Document: FLOW AND ATOMIZATION CHARACTERISTICS OF CRYOGENIC FLUID FROM A COAXIAL ROCKET INJECTOR Vivek Gautam, Ph.D., 2007 Directed By: Professor, Ashwani K. Gupta, Department of Mechanical Engineering High thrust-to-weight ratio and consistent performance over a range of operating conditions make cryogenic rocket engines one of the best options for space propulsion. However, future sp...
متن کاملCore Length and Spray Width Measurements in Shear Coaxial Rocket Injectors from X-ray Radiography Measurements
Shear coaxial injectors are so named because they rely on the shear between an outer low-density, high-velocity annulus and a high-density, low-velocity inner jet to atomize and mix a liquid and a gas. These sprays have an intact core near the injector and the high amount of light scattering its corrugated surface produces creates large optical densities. These high optical densities, in turn, ...
متن کاملSimulation of a Shear Coaxial GO2/GH2 Rocket Injector with DES and LES Using Flamelet Models
HE analysis and design of rocket propulsion systems largely relies on full-scale prototype development and testing. Computational simulation techniques have the potential to assist in the design process if accurate physical models are available. The objective of this study is to address this issues by assessing the predictive capability of three different modeling approaches to simulate the rea...
متن کامل