Photocatalytic TMO-NMs adsorbent: Temperature-Time dependent Safranine degradation, sorption study validated under optimized effective equilibrium models parameter with standardized statistical analysis
نویسندگان
چکیده
In this paper, chemically synthesized copper oxide nanoparticles (CuO-NPs), were employed for two processes: one is photocatalytic degradation and second one adsorption for the sorption of safranine (SA) dye in an aqueous medium at pH = 12.01. The optimized analytes amount (nano-adsorbent = 0.10 g, conc. range of SA dye 56.13 ppm to 154.37 ppm, pH = 12.01, temperature 303 K) reached to equilibrium point in 80 min, which acquired for chemical adsorption-degradation reactions. The degredated SA dye data's recorded by UV-visible spectroscopy for the occurrence of TMO-NMs of CuO-NPs at anticipated period of interval. The feasible performance of CuO-NPs was admirable, shows good adsorption capacity qm = 53.676 mg g-1 and most convenient to best fitted results establish by linear regression equation, corresponded for selected kinetic model (pseudo second order (R2 = 0.9981), equilibrium isotherm models (Freundlich, Langmuir, Dubnin-Radushkevich (D-R), Temkin, H-J and Halsey), and thermodynamic parameters (∆H° = 75461.909 J mol-1, ∆S° = 253.761 J mol-1, ∆G° = -1427.93 J mol-1, Ea = 185.142 J mol-1) with error analysis. The statistical study revealed that CuO-NPs was an effective adsorbent certified photocatalytic efficiency (η = 84.88%) for degradation of SA dye, exhibited more feasibility and good affinity toward adsorbate, the sorption capacity increases with increased temperature at equilibrium point.
منابع مشابه
Nanotransition Materials (NTMs): Photocatalysis, Validated High Effective Sorbent Models Study for Organic Dye Degradation and Precise Mathematical Data’s at Standardized Level
The present work describes the synthesis of copper oxide nanoparticles (CuONPs) via a solution process with the aim of applying the nano-adsorbent for the reduction of methylene blue (MB) dye in alkaline media. These NPs were characterized via Field emission scanning electron microscopy (FE-SEM), X-ray diffraction, high-resolution Transmission electron microscopy (TEM), and ultra violet UV-visi...
متن کاملIsothermal and thermodynamic studies of the adsorption of safranine on MCM-41
The uses of MCM-41 as adsorbent have been studied as an alternative substitution of activated carbon for theremoval dyes. This adsorbent was prepared at laboratory by authors. Adsorption of safranine on MCM-41was studied to examine adsorption thermodynamics. In this study was investigated the effect of proccesparameters like pH, initial dye concentration, temperature and adsorbent mass. MCM-41,...
متن کاملExperimental design study of RB 255 photocatalytic degradation under visible light using synthetic Ag/TiO2 nanoparticles: Optimization of experimental conditions
In the present study, silver-doped TiO2 (Ag/TiO2) nanoparticles were prepared by various Ag doping (wt%) and a combination of sol-gel and ultrasound irradiation. Ag/TiO2 nanoparticles were characterized by energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Based on the Taguchi method, photocatalytic...
متن کاملExperimental design study of RB 255 photocatalytic degradation under visible light using synthetic Ag/TiO2 nanoparticles: Optimization of experimental conditions
In the present study, silver-doped TiO2 (Ag/TiO2) nanoparticles were prepared by various Ag doping (wt%) and a combination of sol-gel and ultrasound irradiation. Ag/TiO2 nanoparticles were characterized by energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Based on the Taguchi method, photocatalytic...
متن کاملRemoval of Acid Red 14 by Pumice Stone as a Low Cost Adsorbent: Kinetic and Equilibrium Study
In this work, removal of C. I. Acid Red 14 was investigated by Pumice stone as a low cost adsorbent. Various parameters such as initial dye solution, contact time and pH were studied. Removal of dye were increased by increasing of contact time and initial dye solution and deceased by increasing of pH. Three isotherm models were studied. Linear and non-linear regression analyses were used fo...
متن کامل