Defect detection of the weld bead based on electromagnetic sensing
نویسندگان
چکیده
Characterization of flaws of weld bead is imperative for high-quality welding. Methods of weld bead inspection include radiographic, ultrasonic and vision inspection. However, such methods are costly and time consuming. The proposed sensor is light, low-cost and fast. This paper summarizes our work on weld bead monitoring and defect detection using an electromagnetic sensor. Measurements are acquired in the form of S-Parameters, specifically measuring changes in the reflected coefficient S11. The weld bead is scanned using the sensor and any form of weld bead defection such as undercutting and excessive penetration is detected and identified.
منابع مشابه
Single Supply Temperature Sensing with Thermocouples
Thermocouples are constructed of two dissimilar metals such as Chromel and Constantan (Type E) or Nicrosil and Nisil (Type N). The two dissimilar metals are bonded together on one end of both wires with a weld bead. This bead is exposed to the thermal environment of interest. If there is a temperature difference between the bead and the other end of the thermocouple wires, a voltage will appear...
متن کاملIntelligent Methodology for Sensing, Modelin and Control of Pulsed GTAW: Part l Bead-on-Plate Welding
This study addresses intelligent techniques for fulfilling quality control of bead-on-plate welding. A new visual double-sided sensing system capable of imaging the weld pool topside and backside simultaneously in a frame was provided to determine the weld pool geometry parameters. The imaging principle was analyzed with spectrum distribution, in which the weld pool was illuminated by arc light...
متن کاملModeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing
Additive Manufacturing describes the technologies that can produce a physical model out of a computer model with a layer-by-layer production process. Additive Manufacturing technologies, as compared to traditional manufacturing methods, have the high capability of manufacturing the complex components using minimum energy and minimum consumption. These technologies have brought about the possibi...
متن کاملStudy on the Heat Transfer Characteristics Performed in the Infrared Thermography Detection of Welded Structure
During the weld defect detection, the heat transfer characteristics are closely related to the material properties of welded structure. Based on the electromagnetic induction infrared thermography technology, the heat transfer Characteristics of the welded material are studied with the changing temperature. By using the finite element analysis software COMSOL, the eddy current density and tempe...
متن کاملFabrication of synchronized hammer peening with pulsed laser welding and its effect on 6061 aluminum alloy weld
The non-continuous laser beam in pulsed lasers allows the mechanical peening between two consecutive beams on a still hot weld bead. At a very short time (20, 150 and 300 ms) after laser pulse application, mechanical peening was performed on the welding bead. To achieve these short times, the light sensor detects the nth laser pulse and the mechanical arm starts moving. Upon reaching the tip of...
متن کامل