Theoretical Study of the BaTiO3 Powder’s Volume Ratio’s Influence on the Output of Composite Piezoelectric Nanogenerator
نویسندگان
چکیده
The combination of the piezoelectric materials and polymer is an effective way to make the piezoelectric nanogenerator (PENG) possess both the polymer's good flexibility and ferroelectric material's high piezoelectric coefficient. The volume ratio of ferroelectric material in the composite is an important factor that determines the PENG's output performance. In this paper, the BaTiO₃/polydimethylsiloxane (PDMS) composite PENG was demonstrated as having an optimal volume ratio (46%) at which the PENG can output its highest voltage, and this phenomenon can be ascribed to the trade-off between the composite PENG's top electrode charge and its capacitance. These results are of practical importance for the composite PENG's performance optimization.
منابع مشابه
Investigating Output Voltage and Mechanical Stability of a Piezoelectric Nanogenerator Based on ZnO Nanowire
The output of a piezoelectric nanogenerator based on ZnO nanowire is largely affected by the shape of nanowire. In order to obtain mechanically stable nanogenerator with high performance, the investigation of mechanical and electrical characteristics related to the nanowires and materials used in nanogenerators are of great interest and significance. This paper presents the various behavior of ...
متن کاملInvestigating Output Voltage and Mechanical Stability of a Piezoelectric Nanogenerator Based on ZnO Nanowire
The output of a piezoelectric nanogenerator based on ZnO nanowire is largely affected by the shape of nanowire. In order to obtain mechanically stable nanogenerator with high performance, the investigation of mechanical and electrical characteristics related to the nanowires and materials used in nanogenerators are of great interest and significance. This paper presents the various behavior of ...
متن کاملPiezoelectric BaTiO₃ thin film nanogenerator on plastic substrates.
The piezoelectric generation of perovskite BaTiO3 thin films on a flexible substrate has been applied to convert mechanical energy to electrical energy for the first time. Ferroelectric BaTiO3 thin films were deposited by radio frequency magnetron sputtering on a Pt/Ti/SiO2/(100) Si substrate and poled under an electric field of 100 kV/cm. The metal-insulator (BaTiO3)-metal-structured ribbons w...
متن کاملBaTiO3 Nanotubes-Based Flexible and Transparent Nanogenerators.
We have developed a simple, cost-effective, and scalable approach to fabricate a piezoelectric nanogenerator (NG) with stretchable and flexible characteristics using BaTiO3 nanotubes, which were synthesized by the hydrothermal method. The NG was fabricated by making a composite of the nanotubes with polymer poly(dimethylsiloxane) (PDMS). The peak open-circuit voltage and short-circuit current o...
متن کاملAnalytical Solution for Electro-mechanical Behavior of Piezoelectric Rotating Shaft Reinforced by BNNTs Under Non-axisymmetric Internal Pressure
In this study, two-dimensional electro-mechanical analysis of a composite rotating shaft subjected to non-axisymmetric internal pressure and applied voltage is investigated where hollow piezoelectric shaft reinforced by boron nitride nanotubes (BNNTs). Composite structure is modeled based on piezoelectric fiber reinforced composite (PFRC) theory and a representative volume element has been cons...
متن کامل