An Actuator Control Unit for Safety-Critical Mechatronic Applications with Embedded Energy Storage Backup
نویسندگان
چکیده
This paper presents an actuator control unit (ACU) with a 450-J embedded energy storage backup to face safety critical mechatronic applications. The idea is to ensure full operation of electric actuators, even in the case of battery failure, by using supercapacitors as a local energy tank. Thanks to integrated switching converter circuitry, the supercapacitors provide the required voltage and current levels for the required time to guarantee actuator operation until the system enters into safety mode. Experimental results are presented for a target application related to the control of servomotors for a robotized prosthetic arm. Mechatronic devices for rehabilitation or assisted living of injured and/or elderly people are available today. In most cases, they are battery powered with lithium-based cells, providing high energy density and low weight, but at the expense of a reduced robustness compared to lead-acidor nickel-based battery cells. The ACU of this work ensures full operation of the wearable robotized arm, controlled through acceleration and electromyography (EMG) sensor signals, even in the case of battery failure, thanks to the embedded energy backup unit. To prove the configurability and scalability of the proposed solution, experimental results related to the electric actuation of the car door latch and of a robotized gearbox in vehicles are also shown. The reliability of the energy backup device has been assessed in a wide temperature range, from ́40 to 130 ̋C, and in a durability test campaign of more than 10,000 cycles. Achieved results prove the suitability of the proposed approach for ACUs requiring a burst of power of hundreds of watts for only a few seconds in safety-critical applications. Alternatively, the aging and temperature characterizations of energy backup units is limited to supercapacitors of thousands of farads for high power applications (e.g., electric/hybrid propulsion) and with a temperature range limited to 70 ̋C.
منابع مشابه
Power Management in a Utility Connected Micro-Grid with Multiple Renewable Energy Sources
As an efficient alternative to fossil fuels, renewable energy sources have attained great attention due to their sustainable, cost-effective, and environmentally friendly characteristic. However, as a deficiency, renewable energy sources have low reliability because of their non-deterministic and stochastic generation pattern. The use of hybrid renewable generation systems along with the storag...
متن کاملMechatronic Systems – Innovative Products with Embedded Control –
Many technical processes and products in the area of mechanical and electrical engineering are showing an increasing integration of mechanics with digital electronics and information processing. This integration is between the components (hardware) and the information-driven functions (software), resulting in integrated systems called mechatronic systems. Their development involves finding an o...
متن کاملVehicle Applications of Controller Area Network
The Controller Area Network (CAN) is a serial bus communications protocol developed by Bosch in the early 1980s. It defines a standard for efficient and reliable communication between sensor, actuator, controller, and other nodes in real-time applications. CAN is the de facto standard in a large variety of networked embedded control systems. The early CAN development was mainly supported by the...
متن کاملPower Scaling Bond Graph Approach to the Passification of Mechatronic Systems - With Application to Electrohydraulic Valves
In many applications that require physical interaction with humans or other physical environments, passivity is a useful property to have in order to improve safety and ease of use. Many mechatronic applications (e.g. teleoperators, robots that interact with humans) fall into this category. In this paper, we develop an approach to design passifying control laws for mechatronic components from a...
متن کاملNew Methodology of Designing Inexpensive Hybrid Control-Acquisition Systems for Mechatronic Constructions
This article presents a new methodology for designing a hybrid control and acquisition system consisting of a 32-bit SoC microsystem connected via a direct Universal Serial Bus (USB) with a standard commercial off-the-shelf (COTS) component running the Android operating system. It is proposed to utilize it avoiding the use of an additional converter. An Android-based component was chosen to exp...
متن کامل