Effects of the Correlation Length on the Hydraulic Parameters of a Fracture Network
نویسندگان
چکیده
We consider the influences of correlation length and aperture variability on the REV, the equivalent permeability of a fracture network, and the uncertainty in the equivalent permeability using a two-dimensional orthogonal bond percolation model. The percolation threshold, correlation length, effective conductivity, and coefficient of variation of the effective conductivity are investigated over statistically representative multiple realizations with Monte Carlo simulations in 2D fracture networks that have log-normally distributed individual fracture permeabilities. We show that although the aperture variability is large, the REV and the correlation length are similar near the percolation threshold. In contrast, when the fracture density is much larger than the percolation threshold they diverge as the aperture variability increases. We characterize the effects of correlation length and aperture variability on effective conductivity with a simple function. From the coefficient of variation analysis, the correlation length can be a criterion for evaluating which conceptual model is appropriate for describing the flow system for a given fracture network when aperture variability is sufficiently small. However, discrete fracture network models are recommended for flow simulation models because of the difficulty of REV estimation and the uncertainty in equivalent hydraulic parameters when aperture variability is large.
منابع مشابه
Developing a 3D stochastic discrete fracture network model for hydraulic analyses
Fluid flow in jointed rock mass with impermeable matrix is often controlled by joint properties, including aperture, orientation, spacing, persistence and etc. On the other hand, since the rock mass is made of heterogeneous and anisotropic natural materials, geometric properties of joints may have dispersed values. One of the most powerful methods for simulation of stochastic nature of geometri...
متن کاملDisplacement Discontinuity Analysis of the Effects of Various Hydraulic Fracturing Parameters on the Crack Opening Displacement (COD)
The combination of horizontal drilling along with hydraulic fracturing has significantly improved the production of hydrocarbon reservoirs and made it possible to extract the relatively impermeable and uneconomical reservoirs. The production rate of oil and gas wells increases proportional to hydraulic fracture aperture or crack opening displacement (COD). This is an important parameter i...
متن کاملFeasibility Study of Network Hydraulic Fracture Applied to the Fissured Competent Sand Oil Reservoir
Chang 8 oil deposit, developed in Hohe and Jihe oil fields at the southern Yi-Shan Slop of Ordos Basin, is regarded as a kind of typical sand reservoir formation with super-low porosity, poor permeability, strong anisotropy as well as locally natural faults and fractures. The previous studies believed that matrix reservoir has a good permeability, whereas fracture reservoir has a reverse manner...
متن کاملHydraulic Fracturing Length Optimization and its Impact on the Reservoir Performance
Hydraulic fracturing is one of the most common methods of well stimulation for reservoirs with low permeability. Hydraulic fracturing increases the flow capacity, alters flow geometry, bypasses damage and improves recovery factor. The pressure of most of Iranian oil reservoirs is declined and consequently the production is reduced. It is necessary to improve the production by using new stimulat...
متن کاملComparison of Different Hydraulic Fracture Growth Models Based on a Carbonate Reservoir in Iran
There has been little interest in the application of hydraulic fracture treatment in Iranian oil fields, thanks to the primarily suitable production rates of the vast oil fields. In this paper, hydraulic fracturing treatment was simulated by different models for a carbonate reservoir in the southwest of Iran. Suitable pay zones were nominated based on the lithology, water-oil saturation, geomec...
متن کامل