Influence of Processing Technology on Mechanical Properties and Structure of Selected Non-ferrous Metals
نویسندگان
چکیده
Contemporary materials should possess high mechanical properties, physical and chemical, as well as technological ones, to ensure long and reliable use. The above mentioned requirements and expectations regarding the contemporary materials are met by the non-ferrous metals alloys used nowadays, including namely the aluminium and magnesium alloys. Presented experimental work focused on the study and comparison of microstructure and mechanical properties selected non-ferrous metals after application different methods of forming and heat treatment respectively. Tensile test for mechanical properties determination were used. The study of microstructures has been used methods of light microscopy.
منابع مشابه
Effect of non-acoustic properties on the sound absorption of polyurethane foams
In this paper the influence of non-acoustic properties on the sound absorption coefficient of polyurethane foams as a porous medium is investigated. Biot’s equations with transfer matrix method, as the solution approach are employed to evaluate the sound absorption coefficient of selected polyurethane foams. The major issue is the dependency of non-acoustic properties on each other which makes ...
متن کاملInfluence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel
In this research the role of alloying elements on the microstructure and mechanical properties of an as cast and hot rolled high strength low alloy (HSLA) steel was studied. Different compositions with different amount of copper in the presence of nickel, hot rolled and quenched in oil. Tensile test, hardness test, scanning electron microscope (SEM) and optical microscope (OM) were used to eval...
متن کاملMicrostructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing
The mechanical properties and microstructural developments of 321 stainless steel during thermomechanical process were investigated. The repetitive cold rolling and subsequent annealing were conducted to achieve nanocrystalline structure in an AISI 321 stainless steel. Heavily cold rolling at −20°C was conducted to form martensite in metastable austenitic steel. The process was followed by anne...
متن کاملInvestigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies
Recently, bulk nano-structured materials produced by severe plastic deformation (SPD) have attracted scientists attention. Materials produced by SPD are of great importance because of (1) non-porous structure, (2) great mechanical properties such as high strength and toughness and (3) proper dimension for mechanical and physical testing. Several methods have been introduced for imposing the s...
متن کاملA study on the sub-structure and mechanical properties of friction stir processed AA 6061-T6 joints with ultra-fine grained structure
Ultra-fine grained (UFG) structure (~0.6 µm) was produced in the stir zone (SZ) of 6061-T6 aluminum alloy joints using friction stir processing (FSP) cooled by liquid nitrogen (N2). A new experimental set-up was used to simultaneously quench the lower and upper surfaces of the samples during the processing. In addition, FSPed joints, using a steel backing plate, were produced at room temperatur...
متن کامل