Coating thickness and elastic modulus measurement using ultrasonic bulk wave resonance
نویسندگان
چکیده
منابع مشابه
Measurement and Analysis of Narrow-band Surface Acoustic Waves in Ceramic Environmental Barrier Coatings
A laser-based ultrasonic system is used to measure the mechanical properties and thickness of mullite environmental barrier coatings deposited on SiC substrates. Narrow-band surface acoustic waves (SAWs) are generated with an amplitude modulated laser source, and a photorefractive crystal based interferometer coupled to a lock-in amplifier is used to detect the resulting surface displacement. T...
متن کاملFriction Material Elastic Property Round Robin Study
A method for ultrasonic measurement of friction material elastic constants was evaluated through a round-robin process. The purpose of the study was two-fold: 1) to formulate and evaluate a standard test method (SAE J2725) for measuring elastic constants using ultrasound and 2) to quantify the measurement variability when the testing method is applied by multiple operators and instrumentation. ...
متن کاملULTRASONIC DETERMINATION OF ELASTIC MODULUS OF MARBLES RELATION WITH POROSITY AND CaO
Since ancient Greek times marble has been used for decoration and for sculpture. In this paper, we have analyzed marble samples, which were selected according to their porosity and the proportion of CaO values, with ultrasonic velocity measurement methods. Elastic modulus was evaluated from longitudinal and transverse velocity of ultrasonic wave propagation in marble samples. Our results indica...
متن کاملApplications of Laser Ultrasonics (lus) to Studies of Microstructural and Mechanical Properties of Metals
During the last three years the Swedish Institute for Metals Research (SIMR) has done extensive work on applications of laser generated ultrasound (LUS). This paper reports results from several experiments mainly aimed at industrial on-line applications. LUS has been used to determine grain sizes in commercial low-carbon (LC) and stainless steels. The analysis method employs a scattering theory...
متن کاملSetting behaviour of luting cements monitored by an ultrasonic method.
The purpose of this study was to monitor the setting behaviour and elastic modulus of luting cements using an ultrasonic device. The ultrasonic equipment comprised a pulser-receiver, transducers and an oscilloscope. The transit time through the cement disk was multiplied by the thickness of the specimen, and the sonic velocity within the material was then calculated. The sonic velocities of the...
متن کامل