Optical-Fiber Power Meter Comparison between NIST and KRISS*
نویسندگان
چکیده
We describe the results of a comparison of reference standards between the National Institute of Standards and Technology (NIST-USA) and Korea Research Institute of Standards and Science (KRISS-R.O. Korea) for optical fiber-based power measurements at wavelengths of 1302 nm and 1546 nm. We compare the laboratories' reference standards by means of a temperature-controlled optical trap detector. Measurement results showed the largest difference of less than 2.5 parts in 10(3), which is within the combined standard (k=1) uncertainty for the two laboratories' reference standards.
منابع مشابه
Bilateral Comparison on Polarization Mode Dispersion between KRISS and NIST
Polarization mode dispersion (PMD) is one of the major parameters used to characterize optical fiber and fiber optic components. It has to be accurately measured and controlled or mitigated to ensure optical signal transmission with modulation rates of more than 10 Gbps for conventional single mode fiber [1]. Demand for PMD references has been gradually increasing as the instruments of PMD meas...
متن کاملOptical-Fiber Power Meter Comparison Between NIST and PTB
We describe the results of a comparison of reference standards between the National Institute of Standards and Technology (NIST-USA) and National Institute of Metrology (NIM-China). We report optical fiber-based power measurements at nominal wavelengths of 1310 nm and 1550 nm. We compare the laboratories' reference standards by means of a commercial optical power meter. Measurement results show...
متن کاملOptical Fiber Power Meter Calibrations at NIST
The optical fiber power meter (OFPM) is perhaps the most common type of test equipment used to support the development and implementation of optical fiber systems. To address the inherent metrology requirements, NIST has developed and implemented measurement services to help characterize these instruments [1]. These measurement services consist primarily of absolute laser power calibrations usi...
متن کاملBilateral Optical Power Meter Comparison Between NIST and CENAM*
We describe the results of a comparison of reference standards between the National Institute of Standards and Technology (NIST-USA) and Centro Nacional De Metrología (CENAM-Mexico). Open beam (free field) and optical-fiber-based measurements at wavelengths of 1302 nm and 1546 nm are reported. Both laboratories' reference standards were compared by means of a temperature-controlled optical trap...
متن کاملPropose of a novel method to simulate and optimize a polymer optical fiber daylighting system
Optical fiber day lighting systems help the efficiency of using solar energy in the lighting system in domestic, industrial and agricultural sectors. A lot of work has been done on these systems, but the lack of a reliable simulation method to reduce the tolerance, time and cost is evident. In this regard, in this paper, a novel method based on two powerful Optifiber and Zemax software has bee...
متن کامل