Experimental investigation of using methanol-diesel blended fuels in diesel engine
نویسندگان
چکیده
A comprehensive study on the methanol as an alternative fuel has been carried out. A four stroke four cylinder diesel engine was adopted to study engine power, torque, break specific fuel consumption, break thermal efficiency and exhaust temperature with the fuel of fraction methanol in diesel. In this study, the diesel engine was tested using methanol blended with diesel at certain mixing ratio of 10:90, 20:80 and 30:70 of methanol to diesel respectively. The performance of the engine using blended fuel compared to the performance of engine with diesel fuel. Experimental results showed that the output power and torque for diesel fuel is lower compared to methanol-diesel blended fuel at any ratio. The best mixing ratio that produced the lowest exhaust temperature was at 10% of Methanol in 90% of Diesel fuel. The exhaust temperature for diesel fuel was higher compared to any mixing of the blended fuel. The brake specific fuel consumption for the three mixing ratios was not varying significantly but the lowest was for 30% Methanol and 70% Diesel. The specific fuel consumption for diesel fuel was much lower compared to any mixing ratio. It was noticed that brake thermal efficiency was thus improved in almost all operation conditions with the methanol and diesel blended fuels.
منابع مشابه
The Effect of Load and the Methanol Percentage in the Blended Fuels on the Performance of Four Stroke Single Cylinder Water Cooled Diesel Engine
Experimentation about alternative fuels started mostly after the oil crisis of 1980’s to 1990’s after the World War II. In order to reduce the use of petroleum product which are limited in nature, the idea of alternative fuels was developed. In this paper an attempt has been made to investigate the engine performance in a four stroke single cylinder water cooled diesel engine using pure diesel ...
متن کاملInvestigation of Blended Palm Biodiesel-Diesel Fuel Properties with Water Emulsification
Under the crisis of global warming and drastic climate changing, carbon-neutral renewable energy is considerably proposed as a feasible clean alternative energy to fractionally replace fossilized fuel. To cop up with ever stringent emission regulations, researchers have investigated different types of renewable fuels like biodiesel and water emulsion. The fuel physical characteristics are among...
متن کاملInvestigation of injection timing and different fuels on the diesel engine performance and emissions
Start of fuel injection and fuel type are two important factors affecting engine performance and exhaust emissions in internal combustion engines. In the present study, a one-dimensional computational fluid dynamics solution with GT-Power software is used to simulate a six-cylinder diesel engine to study the performance and exhaust emissions with different injection timing and alternative fuels...
متن کاملThe influence of operating parameters on the performance and emissions of a DI diesel engine using methanol-blended-diesel fuel
In this study, the effects of injection pressure and timing on the performance and emission characteristics of a DI diesel engine using methanol (5%, 10% and 15%) blended-diesel fuel were investigated. The tests were conducted on three different injection pressures (180, 200 and 220 bar) and timings (15 , 20 , and 25 CA BTDC) at 20 Nm engine load and 2200 rpm. The results indicated that brake s...
متن کاملEffect of coconut biodiesel blended fuels on engine performance and emission characteristics
Alternative fuels have received much attention due to the depletion of world petroleum reserves and increased environmental concerns. Thus processed form of vegetable oil (Biodiesel) offers attractive alternative fuels to compression ignition engines. The present work investigates the engine performance parameters and emissions characteristics for direct injection diesel engine using coconut bi...
متن کامل