of Heat Transfer Technical Brief ool Boiling Experiments on ultiwalled Carbon Nanotube

نویسندگان

  • Seok Ahn
  • ipun Sinha
  • H. Baughman
  • Ramendra P. Roy
چکیده

n this study, two silicon wafer substrates were coated with vertially aligned multiwalled carbon nanotubes (MWCNT) “forests” nd were used for pool boiling studies. The MWCNT forests (9 nd 25 m in height) were synthesized on the silicon wafer subtrates using chemical vapor deposition (CVD) process. The subtrates were clamped on a cylindrical copper block with embeded cartridge heaters. The heat flux was measured using sheathed -type thermocouples, which were placed inside the cylindrical opper block. Pool boiling experiments using refrigerant PF-5060 s the working liquid were conducted to obtain the pool “boiling urve.” The experiments were conducted in nucleate and film oiling regimes to investigate the effect of MWCNT height on pool

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Subcooled Pool Boiling Experiments on Horizontal Heaters Coated With Carbon Nanotubes

Pool boiling experiments were conducted with three horizontal, flat, silicon surfaces, two of which were coated with vertically aligned multiwalled carbon nanotubes (MWCNTs). The two wafers were coated with MWCNT of two different thicknesses: 9 m (Type-A) and 25 m (Type-B). Experiments were conducted for the nucleate boiling and film boiling regimes for saturated and subcooled conditions with l...

متن کامل

Single Walled Carbon Nanotube Effects on Mixed Convection heat Transfer in an Enclosure: a LBM Approach

The effects of Single Walled Carbon Nanotube (SWCNT) on mixed convection in a cavity are investigated numerically. The problem is studied for different Richardson numbers (0.1-10), volume fractions of nanotubes (0-1%), and aspect ratio of the cavity (0.5-2.5) when the Grashof number is equal to 103. The volume fraction of added nanotubes to Water as base fluid are lowers than 1% to make dilute ...

متن کامل

Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE)

Shrinking the engine has been a great interest for many years. Providing more amount of heat transfer may supply possibilities for size reduction in engine parts specifically the engine water jacket that is of concentration for the present study. Boiling phenomenon, by providing more amounts of heat transfer in comparison with single-phase, provides conditions for size reduction. In this paper ...

متن کامل

Experimental Investigation of Boiling and Condensation Heat Transfer of a two Phase Closed Thermosyphon

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of the thermosyphon. The experimental boiling and condensation heat transfer coefficients inside the thermosyphon were com...

متن کامل

Experimental Investigation of Boiling and Condensation Heat Transfer of a Two Phase Closed Thermosyphon

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of a thermosyphon with a copper tube having 25 and 32 mm inside and outside diameters. Distilled water was used as the wor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006