Control Oriented Modeling of the Gas Exchange Process in Variable Cam Timing Engines
نویسنده
چکیده
Variable cam timing engines pose new questions for engine control system designers. The cam timing directly influences cylinder air charge and residual mass fraction. Three models that predict residual mass fraction are investigated for a turbocharged dual independent Variable Cam Timing (VCT) engine. The three models (Fox et. al. 1993, Ponti et. al. 2002, and Mladek et. al. 2000) that all have real time capabilities are evaluated and validated against data from a crank angle based reference model. None of these models have previously been validated to cover this engine type. It is shown that all three models can be extended to dual independent VCT engines and that they also give a good description of the residual gas fraction. However, it is shown that the two most advanced models, based on a thermodynamic energy balance, are very sensitive to the model inputs and proper care must therefore be taken when these models are used.
منابع مشابه
A Predictive Model for the Combustion Process in Dual Fuel Engines at Part Loads Using a Quasi Dimensional Multi Zone Model and Detailed Chemical Kinetics Mechanism
This work is carried out to investigate combustion characteristics of a dual fuel (diesel-gas) engine at part loads, using a quasi-dimensional multi zone combustion model (MZCM) for the combustion of diesel fuel and a single zone model with detailed chemical kinetics for the combustion of natural gas fuel. Chemical kinetic mechanisms consist of 184 reactions with 50 species. This combustion mod...
متن کاملVariable Cam Timing: Consequences to Automotive Engine Control Design
Abstract: One objective of this paper is to illuminate fuel economy and emission improvement mechanisms of variable cam timing systems and analyze their effects on engine control system design. By retarding or advancing the cam phase one can vary the engine volumetric efficiency, as well as the amount of exhaust gas that dilutes the air charge. Combining these effects with intake manifold and e...
متن کاملOptimal Integral State Feedback Control of HCCI Combustion Timing
Homogenous Charge Compression Ignition (HCCI) engines hold promise of high fuel efficiency and low emission levels for future green vehicles. But in contrast to gasoline and diesel engines, HCCI engines suffer from lack of having direct means to initiate combustion. A combustion timing controller with robust tracking performance is the key requirement to leverage HCCI application in production ...
متن کاملNumerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics
Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...
متن کاملA comparison of different network based modeling methods for prediction of the torque of a SI engine equipped with variable valve timing
Nowadays, due to increasing the complexity of IC engines, calibration task becomes more severe and the need to use surrogate models for investigating of the engine behavior arises. Accordingly, many black box modeling approaches have been used in this context among which network based models are of the most powerful approaches thanks to their flexible structures. In this paper four network base...
متن کامل