An interface for a 300°/s capacitive 2-axis micro-gyroscope with pseudo-CT readout
نویسندگان
چکیده
This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Aalto University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected].
منابع مشابه
Pseudo-Continuous-Time Readout Circuit for a 300 /s Capacitive 2-Axis Micro-Gyroscope
The interface for a capacitive 2-axis micro-gyroscope is implemented in a 0.35m HVCMOS technology with an active area of 2.5 mm . Compared to a regular continuous-time interface with large on-chip RC time constants, the reduction of the chip area is made possible by the pseudo-continuous-time readout technique, of which a detailed analysis is presented in this paper. The technique allows a dc b...
متن کاملAn Elastically Gimbaled Z-Axis CMOS-MEMS Gyroscope
This paper presents a vertical (Z-axis) CMOS-MEMS gyroscope with a measured noise floor of 0.03°/sec/ and 1% linearity in the range of -360° /sec to 360°/sec. The gyroscope is fully compatible with conventional CMOS processes, which enable the integration of most of the conditioning circuits. It is fabricated in a three-metal-layer 0.5μm CMOS process followed by a two-step dry etch release. An ...
متن کاملA high-performance silicon-on-insulator MEMS gyroscope operating at atmospheric pressure
This paper presents a new, high-performance silicon-on-insulator (SOI) MEMS gyroscope with decoupled oscillation modes. The gyroscope tructure allows it to achieve matched-resonance-frequencies, large drive-mode oscillation amplitude, high sense-mode quality factor, and low echanical cross-talk. The gyroscope is fabricated through the commercially available SOIMUMPS process of MEMSCAP Inc. The ...
متن کاملA 62μA Interface ASIC for a Capacitive 3-Axis Micro-Accelerometer
Capacitive accelerometers [1] have advantages such as zero static bias current, the capability of high sensitivity, and excellent thermal stability, making their use in low-power applications attractive. In this paper, an interface ASIC designed for a capacitive 3-axis micro-accelerometer [2] is presented. The die area and power dissipation are reduced by using time-multiplexed sampling and dut...
متن کاملPull-In Instability and Vibrations of a Beam Micro-Gyroscope
Gyroscopes are used as rotation rate sensors. Conventional gyroscopes are heavy and bulky, which creates important problems regarding their usage in different applications. Micro-gyroscopes have solved these problems due to their small size. The beam micro-gyroscope is one of the popular types of inertial sensors. Their small dimensions and low energy consumption are key reasons for their popul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009