Contact area measurements reveal loading-history dependence of static friction.
نویسندگان
چکیده
We perform quantitative measurements of the actual area of contact, A, formed by two rough solids that are subjected to different normal loading protocols. We show that microscopic motion, induced by Poisson contraction or expansion, produces a strong memory dependence of on the loading history with a large corresponding influence on the system's frictional strength. These effects, together with accompanying transient dynamics, are independent of humidity, loading rates, and material contrast across the interface.
منابع مشابه
Novel Friction Law for the Static Friction Force based on Local Precursor Slipping
The sliding of a solid object on a solid substrate requires a shear force that is larger than the maximum static friction force. It is commonly believed that the maximum static friction force is proportional to the loading force and does not depend on the apparent contact area. The ratio of the maximum static friction force to the loading force is called the static friction coefficient µM, whic...
متن کاملContact compliance effects in the frictional response of bioinspired fibrillar adhesives.
The shear failure and friction mechanisms of bioinspired adhesives consisting of elastomer arrays of microfibres terminated by mushroom-shaped tips are investigated in contact with a rigid lens. In order to reveal the interplay between the vertical and lateral loading directions, experiments are carried out using a custom friction set-up in which normal stiffness can be made either high or low ...
متن کاملStatic Friction in Elastic Adhesive MEMS Contacts, Models and Experiment
Static friction in shearing mode can be expressed as the product of the shear strength of the interface and the real contact area. The influence of roughness on friction in elastic adhesive contact is analyzed. Special attention is paid to low loading conditions, in which the number of contact points is small. The models are used to analyze a friction experiment in a MEMS friction meter.
متن کاملFriction and camber influences on the static stiffness properties of a racing tyre
Investigation of the stationary load-deflection behaviour of tyres reveals many details of the structure and the rubber to road friction properties. These characteristics are fundamental to the understanding of the behaviour of both the stationary and the rolling tyre. In connection with racing, tyre static stiffness characteristics are of interest as they reflect on the controllability of the ...
متن کاملNon-monotonic dependence of the friction coefficient on heterogeneous stiffness
The complexity of the frictional dynamics at the microscopic scale makes difficult to identify all of its controlling parameters. Indeed, experiments on sheared elastic bodies have shown that the static friction coefficient depends on loading conditions, the real area of contact along the interfaces and the confining pressure. Here we show, by means of numerical simulations of a 2D Burridge-Kno...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 96 25 شماره
صفحات -
تاریخ انتشار 2006