Humidity Sensitivity of Multi-Walled Carbon Nanotube Networks Deposited by Dielectrophoresis
نویسندگان
چکیده
This paper presents an investigation on the humidity sensitivity of deposited multi-walled carbon nanotube (MWCNT) networks using ac dielectrophoresis (DEP) between interdigitated electrodes (IDEs). MWCNTs dispersed in ethanol were trapped and enriched between IDEs on a Si/SiO(2) substrate under a positive DEP force. After the DEP process, the ethanol was evaporated and the MWCNT network on a substrate with IDEs was put into a furnace for repeated thermal annealing. It was found that the resistance stability of the network was effectively improved through thermal annealing. The humidity sensitivity was obtained by measuring the resistance of the MWCNT network with different relative humidity at room temperature. The experimental results show the resistance increases linearly with increasing the relative humidity from 25% to 95% RH with a sensitivity of 0.5%/%RH. The MWCNT networks have a reversible humidity sensing capacity with response time and recovery time of about 3 s and 25 s, respectively. The resistance is dependent on temperature with a negative coefficient of about -0.33%/K in a temperature range from 293 K to 393 K.
منابع مشابه
Strain Sensitivity in Single Walled Carbon Nanotubes for Multifunctional Materials
Single walled carbon nanotubes represent the future of structural aerospace vehicle systems due to their unparalleled strength characteristics and demonstrated multifunctionality. This multifunctionality rises from the CNT’s unique capabilities for both metallic and semiconducting electron transport, electron spin polarizability, and band gap modulation under strain. By incorporating the use of...
متن کاملHigh Resolution Image with Multi-wall Carbon Nanotube Atomic Force Microscopy Tip (RESEARCH NOTE)
In this paper, a simple and reproducible approach for attaching the multi-wall carbon nanotubes (MWNTs) to the apex of the atomic force microscope probe has been proposed. For this purpose, the dielectrophoresis method was applied due to its simple performance, cheapness and reliability. In this method, various parameters such as voltage, frequency, concentration of carbon nanotubes solution an...
متن کاملDevelopment and Fabrication of Carbon Nanotube (CNT) based Morphological and Electrical Characterization
This paper presents the development and fabrication of carbon nanotube (CNT) based sensor devices through morphological and electrical characterization. The silicon oxide (SiO2) as insulator is formed by dry oxidation process and Aurum (Au) layer is deposited using thermal evaporator. Then, the electrodes pattern is transferred by photolithography process. The single-walled carbon nanotubes (SW...
متن کاملSingle-walled carbon nanotube transistors fabricated by advanced alignment techniques utilizing CVD growth and dielectrophoresis
Single-walled carbon nanotube field effect transistors (SWNT-FETs) are fabricated by two different alignment techniques. The first technique is based on direct synthesis of an aligned SWNTs array on quartz wafer using chemical vapor deposition. The transistor with three SWNTs and atomic layer deposited (ALD) Al2O3 gate oxide shows a contact resistance of 280 KX, a maximum on-current of 7 lA, an...
متن کاملComparison of Buspirone adsorption by modification of carboxylated multi-walled carbon nanotube
To overcome the problems of gene and drug delivery, nanotechnology has gained interest in recent years. Nanosystems with different compositions and biological properties have been extensively investigated for drug and gene delivery applications. Nanotechnology in drug delivery has been manifested into nanoparticles that can have unique properties both in vitro and in vivo, especially in targete...
متن کامل