Production of Light Olefins through Gas Oil Cracking
نویسندگان
چکیده
Light olefins such as ethylene, propylene, and butylenes, are basic building blocks for petrochemicals. Further, these olefins are also useful for production of clean fuels such as alkylates – which have high octanes but no sulfur, olefins, and aromatics – or as octaneenhancers such as ethers. The conventional olefin production process is steam cracking of C2−C4 light paraffins from natural gas or from refinery gas streams. However, the increasing demand for gaseous fuel and the rising price of natural gas have limited the supply of light hydrocarbons.
منابع مشابه
Thermodynamic Analysis of Light Olefins Production via Cracking of n-Hexane Using Gibbs Energy Minimization Approach and Analysis of Overall Reactions
Thermodynamic analysis of the cracking of hexane has been conducted by the Gibbs free energy minimization method and second law analysis of overall reactions. By-products have been divided into three groups of methane, alkynes and aromatics and their possible production paths have been discussed. Effect of operating conditions such as temperature and steam-to-hexane ratio on the cracking perfor...
متن کاملLow Temperature Catalytic Cracking of Heavy Feedstock Optimized by Response Surface Method
Upgrading of cracked PFO (Pyrolysis fuel oil) for production of fuels, such as gasoline and light gasoil, was carried out in a semi batch reactor. Two different kinds of mesoporous and microporous catalysts, MCM-41 and ZSM-5, were used. Modification methods, such as ion exchange and impregnation with Fe and Ti, were done for tuning the acidity of the catalyst. XRD, FT-IR, and XRF analyzes were ...
متن کاملOlefin production from catalytic cracking of light fuel oil over different additives
The catalytic cracking of a fuel oil over fluid catalytic cracking (FCC) catalyst has been investigated applying different additives. Catalyst mixtures consisting of a equilibrium FCC catalyst (E-Cat) blended with ZSM-5, MCM-41 and Mordenite additives were examined at the additive levels of 25 wt.%. The catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (MAT...
متن کاملOlefin production from catalytic cracking of light fuel oil over different additives
The catalytic cracking of a fuel oil over fluid catalytic cracking (FCC) catalyst has been investigated applying different additives. Catalyst mixtures consisting of a equilibrium FCC catalyst (E-Cat) blended with ZSM-5, MCM-41 and Mordenite additives were examined at the additive levels of 25 wt.%. The catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (MAT...
متن کاملWood-derived olefins by steam cracking of hydrodeoxygenated tall oils.
Tall oil fractions obtained from Norwegian spruce pulping were hydrodeoxygenated (HDO) at pilot scale using a commercial NiMo hydrotreating catalyst. Comprehensive two dimensional gas chromatography (GC×GC) showed that HDO of both tall oil fatty acids (TOFA) and distilled tall oil (DTO) produced highly paraffinic hydrocarbon liquids. The hydrotreated fractions also contained fatty acid methyl e...
متن کامل