Application of classical nucleation theory to phase selection and composition of nucleated nanocrystals during crystallization of Co-rich (Co,Fe)-based amorphous precursors
نویسندگان
چکیده
Classical steady-state nucleation theory is applied to Co-rich Fe,Co-based alloys to provide a rationale for experimental observations during the nanocrystallization of Co-rich (Co,Fe)89Zr7B4 and (Co,Fe)88Zr7B4Cu1 amorphous precursors. The amorphous precursor free energy is estimated using density functional theory. This simple theory suggests: (i) strain or interface energy effects could explain a tendency for a body-centered cubic (bcc) phase to form during crystallization. Dissolved glass formers (Zr,B) in crystalline phases may also contribute; (ii) similar face-centered cubic (fcc) and hexagonal close-packed (hcp) free energies could explain the presence of some hcp phase after crystallization even though fcc is stable at the crystallization temperature; (iii) nanocrystal compositions vary monotonically with the Co:Fe ratio of the amorphous precursor even when multiple phases are nucleating because nucleation is not dictated by the common tangency condition governing bulk phase equilibria; and (iv) Fe-enrichment of the bcc phase can be attributed to a relatively small free energy difference between the amorphous and bcc phases for high Co-containing alloys. 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
Composition and non-equilibrium crystallization in partially devitrified co-rich soft magnetic nanocomposite alloys
The body-centered cubic (bcc) phase tends to preferentially nucleate during solidification of highly undercooled liquid droplets of binary alloy systems, including Fe–Co, Fe–Ni and Fe–Cr–Ni. We investigate a similar tendency during the partial devitrification of Co-rich amorphous precursors of composition (Co1 xFex)88Zr7B4Cu1 by identifying the structure and composition of the nanocrystalline g...
متن کاملA DETAILED STUDY TOWARD THE NANO -CRYSTALLIZATION OF α – Fe IN Fe55-X Cr18Mo7B16C4 BULK AMORPHOUS ALLOY
Crystallization of α – Fe phase during annealing process of Fe55Cr18Mo7B16C4 bulk amorphous alloy has been evaluated by X- ray diffraction, differential scanning calorimetric tests and TEM observations in this research. In effect, crystallization mechanism and activation energy of crystallization were evaluated using DSC tests in four different heating rates (10, 20, 30, 40 K/min). A two -st...
متن کاملKINETICS OF -Fe NANOCRYSTALLIZATION IN Fe55Cr18Mo7B16C4 BULK AMORPHOUS ALLOY
Abstract: In this research work, crystallization kinetics of Fe55Cr18Mo7B16C4 alloy was evaluated by X-ray diffraction, TEM observations and differential scanning calorimetric tests. In practice, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates. Results showed that a two -step crystallization process occurred in the alloy in which - Fe phas...
متن کاملNANOCRYSTALLIZATION MECHANISMS OF Fe52Cr18Mo7B16C4Nb3 BULK AMORPHOUS STEEL
Crystallization kinetics of Fe52Cr18Mo7B16C4Nb3 alloy was evaluated using X-ray diffraction, differential scanning calorimetric (DSC) tests and TEM observations in this research work. In effect, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates (10, 20, 30, 40 K/min) and kinetic models (i.e. Kissinger- Starink, Ozawa, and Matusita methods). ...
متن کاملStructure and Thermomagnetic Properties of New FeCo-based Nanocrystalline Ferromagnets
FeCo-based ferromagnetic alloys (HITPERM variants) of composition Fe44 5Co44 5Zr7B4, Fe44Co44Zr5 7B3 3Ta2Cu1, Fe44Co44Zr5 7B3 3Mo2Cu1, and Fe37 2Co30 8Zr7B4Cu1 were prepared by melt-spinning amorphous precursors, followed by nanocrystallization. Samples were characterized using vibrating sample magnetometry (VSM), x-ray diffraction (XRD), and differential scanning calorimetry (DSC). VSM was use...
متن کامل