Synthesis of Polypyrrole-Intercalated Grafted Zirconium Phosphate Films by Anodic Electrodeposition and Their Electrochemical Capacities
نویسندگان
چکیده
Ternary hybrid film composed of -zirconium phosphate nanosheet, 1,2-bis(dimethylchlorosilyl)ethane and polypyrrole was prepared by anodic electrodeposition. In the hybrid film, ordered -zirconium nanosheets with grafts by silylation lay down parallel to the substrate and the polypyrrole molecules were intercalated between the nanosheets. The electrochemical measurements confirmed that the hybrid film indicated capacitive behavior and the redox activity increase by approximately 25%.
منابع مشابه
Anodic electrodeposition of highly oriented zirconium phosphate and polyaniline-intercalated zirconium phosphate films.
Films of highly oriented alpha-zirconium phosphate and polyaniline-intercalated zirconium phosphate with controllable thickness in the micrometer range were grown anodically on Pt electrodes. To optimize the electrodeposition conditions, the exfoliation of alpha-zirconium phosphate by tetrabutylammonium (TBA) salts was investigated in several nonaqueous solvents. Acetonitrile was found to be th...
متن کاملElectrodeposition and Capacitive Behavior of Films for Electrodes of Electrochemical Supercapacitors
Polypyrrole films were deposited by anodic electropolymerization on stainless steel substrates from aqueous pyrrole solutions containing sodium salicylate and tiron additives. The deposition yield was studied under galvanostatic conditions. The amount of the deposited material was varied by the variation of deposition time at a constant current density. SEM studies showed the formation of porou...
متن کاملElectrochemical Synthesis and Characterization of Ti Modified Electrodes with Polypyrrole – Polyethylene Glycol Hybrid Coating
The preparations and characterization of polypyrrole – polyethylene glycol (PPy-PEG) films are reported in this paper. The composite films were synthesized by electrochemical method in 0.2 mol·L-1 Py and 5% PEG in 0.2 mol·L-1 oxalic acid. The electrochemical behaviour of PPy and PPy-PEG coatings has been investigated in phosphate buffer solution (PBS) by cyclic voltammetry, Tafel plots and elec...
متن کاملPVA and EDTA grafted superparamagnetic Ni doped iron oxide nanoparticles prepared by constant current electrodeposition for biomedical applications
In this paper, a rapid and room temperature electrochemical method is introduced in preparationof Ni doped iron oxide nanoparticles (Ni-IONs) grafted with ethylenediaminetetraacetic acid (EDTA)and polyvinyl alcohol (PVA). EDTA/Ni-IONs and PVA/Ni-IONs samples were prepared through baseelectro-generation on the cathode surface from aqueous solution of iron(II) chloride, iron(III...
متن کاملElectrochemical deposition of conductive and adhesive polypyrrole-dopamine films
Electrode surfaces have been widely modified with electrically conductive polymers, including polypyrrole (PPY), to improve the performance of electrodes. To utilize conductive polymers for electrode modification, strong adhesion between the polymer films and electrode substrates should be ensured with high electrical/electrochemical activities. In this study, PPY films were electrochemically p...
متن کامل