A Substrate-independent Wafer Transfer Technique for Surface-micromachined Devices
نویسندگان
چکیده
We report on a new wafer transfer technique that can remove and transfer surface-micromachined layers to application-specific substrates. This process, however, is not limited to only MEMS devices and can be applicable to other semiconductor devices. Successful transfer of a 1 cm x 1 cm MEMS chip with electrostatically actuated curled cantilever switches to a transparent quartz substrate has been demonstrated. Pull-in voltage for transferred devices is 31 V compared with 23 V for devices on standard silicon substrates.
منابع مشابه
Two-stage polymer embossing of co-planar microfluidic features for microfluidic devices
A two-stage embossing technique for fabricating microchannels for microfluidic devices is presented. A micromachined aluminum mold is used o emboss a polyetherimide (PEI) substrate with a relatively high glass transition temperature (T ). The embossed PEI is then used as a mold for g mbossing an amorphous polyethylene terephthalate (APET) substrate with a lower Tg. The resulting APET substrate ...
متن کاملMicromachined Antennas for Integration with Silicon Based Active Devices
In this thesis micromachined antennas suitable for on-chip integration with silicon based active devices are treated. The emphasis is put on compact 24 GHz antennas, capable of being integrated in commercial SiliconGermanium (SiGe) processes using low temperature post processing micromachining techniques. Antenna types covered are the slot loop antenna, wire loop antenna, meandered dipole and t...
متن کاملFabrication of thick silicon nitride blocks for integration of RF devices
Introduction: The enormous growth of wireless and portable applications has led to strong demands for high-performance monolithic low-cost passive components in RF and microwave integrated circuits (ICs). However, some traditional microwave passive components such as transmission lines and filters are difficult to integrate on the same chip with the RF and microwave circuits owing to the high s...
متن کاملFabrication of thick silicon nitride blocks for integration of RF devices - Electronics Letters
Introduction: The enormous growth of wireless and portable applications has led to strong demands for high-performance monolithic low-cost passive components in RF and microwave integrated circuits (ICs). However, some traditional microwave passive components such as transmission lines and filters are difficult to integrate on the same chip with the RF and microwave circuits owing to the high s...
متن کاملEfficient tools for the design and simulation of microelectromechanical and microfluidic systems
In air-packaged surface micromachined devices and microfluidic devices the surface to volume ratio is such that drag forces play a very important role in device behavior and performance. Especially for surface micromachined devices, the amount of drag is greatly influenced by the presence of the nearby substrate. In this thesis a precorrected FFT accelerated boundary element method specialized ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004