Optimization and Modelling of Process Parameters Involved in Ultrasonic Machining of Glass Using Design of Experiments and Regression Approach
نویسنده
چکیده
Glass is an ideal material for parts with micro-holes and has been widely used in automotive, aerospace and woodworking industries due to its superior wear and corrosion resistance. In this research paper, the statistical analysis of the ultrasonic machining of glass using design of experiments and regression approach has been done. The performance characteristics such as material re moval rate of machined samples using ultrasonic machining process have been presented. The experimental conditions were designed by using the design of experiments approach. The analysis of results has been done using the MINITAB 14.0 software and results obtained are validated by conducting the confirmation experiments. The F-test and P-value has been applied to determine the significant parameters.
منابع مشابه
Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters
The main objectives of this research are, therefore, to assess the effects of process parameters and to determine their optimal levels machining of Inconel 718 super alloy. gap voltage, current, time of machining and duty factor are tuning parameters considered to be study as process input parameters. Furthermore, two important process output characteristic, have been evaluated in this research...
متن کاملDevelopment of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM
Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle work pieces by using shaped tools, high-frequency and an abrasive slurry. This paper addresses the concept and development of an expert system (ES) for hard and brittle material, such as glass, quartz, diamond, carbides, semi conducting materials, ceramic and graphite which ca...
متن کاملDevelopment of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM
Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle work pieces by using shaped tools, high-frequency and an abrasive slurry. This paper addresses the concept and development of an expert system (ES) for hard and brittle material, such as glass, quartz, diamond, carbides, semi conducting materials, ceramic and graphite which ca...
متن کاملAn empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm
Among the several non-conventional processes, electrical discharge machining (EDM) is the most widely and successfully applied for the machining of conductive parts. In this technique, the tool has no mechanical contact with the work piece and also the hardness of work piece has no effect on the machining pace. Hence, this technique could be employed to machine hard materials such as super allo...
متن کاملApplication of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
Face milling is an important and common machining operation because of its versatility and capability to produce various surfaces. Face milling is a machining process of removing material by the relative motion between a work piece and rotating cutter with multiple cutting edges. It is an interrupted cutting operation in which the teeth of the milling cutter enter and exit the work piece during...
متن کامل