Design and Analysis of E-Shaped Microstrip Patch Antenna
نویسنده
چکیده
Abstract: An E-shaped patch antenna is designed for ISM band of frequency. The proposed antenna is designed on a flexible substrate. The polyamide having dielectric constant of 4.3 is one of the flexible substrate and used for design of the proposed antenna. Due to the flexibility feature of the substrate this antenna is used as wearable antenna. Simulated and measured results for main parameters such as return loss, impedance bandwidth, radiation patterns and gains are also discussed herein. From the analysis of result it is verified that the design and modeling of this antenna is suitable of ISM band of frequency.
منابع مشابه
A compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملNonlinear Modeling, Analysis and Design of an Active Antenna in S Frequency Band
An active antenna for transmitter application in S frequency band is designed and analyzed using harmonic balance technique which is based on the nonlinear model of active devices. In this active antenna, the amplifier is integrated with the radiator which is a rectangular patch antenna. This patch antenna is analyzed employing full-wave momentum method. By applying nonlinear model of transisto...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملBroadband E-h Shaped Microstrip Patch Antenna for Wireless Systems
A broadband inverted E-H shaped microstrip patch antenna is proposed and experimentally investigated. The antenna employs novel E-H shaped patch with L-probe feed technique. Prototype of the proposed antenna has been fabricated and measured for electromagnetic analysis including the impedance bandwidth, radiation pattern, and antenna gain. The designed antenna has a dimension of 80mm by 50 mm, ...
متن کامل