Accurate measurement of electron beam induced displacement cross sections for single-layer graphene.
نویسندگان
چکیده
We present an accurate measurement and a quantitative analysis of electron-beam-induced displacements of carbon atoms in single-layer graphene. We directly measure the atomic displacement ("knock-on") cross section by counting the lost atoms as a function of the electron-beam energy and applied dose. Further, we separate knock-on damage (originating from the collision of the beam electrons with the nucleus of the target atom) from other radiation damage mechanisms (e.g., ionization damage or chemical etching) by the comparison of ordinary (12C) and heavy (13C) graphene. Our analysis shows that a static lattice approximation is not sufficient to describe knock-on damage in this material, while a very good agreement between calculated and experimental cross sections is obtained if lattice vibrations are taken into account.
منابع مشابه
In Situ Imaging of Layer-by-Layer Sublimation of Suspended Graphene
An individual suspended graphene sheet was connected to a scanning tunneling microscopy probe inside a transmission electron microscope, and Joule heated to high temperatures. At high temperatures and under electron beam irradiation, the few-layer graphene sheets were removed layer-by-layer in the viewing area until a monolayer graphene was formed. The layer-by-layer peeling was initiated at va...
متن کاملControlled Shrinking of Nanopores in Single Layer Graphene Using Electron Beam Irradiation
This paper reports electron beam induced shrinking of nanopores drilled in free-standing graphene. Nanopores with diameters in the range of 40-60 nm were easily shrunk down to 2 nm and even completely closed by exposure to low beam current densities in a transmission electron microscope (TEM). This method can be used to fine-tune nanopore shape and size, as well as to heal secondary defects and...
متن کاملGraphene in edge-carboxylated graphite by ball milling and analyses using finite element method
Edge-carboxylated graphite (ECG) was produced by grinding pristine graphite in a planetary ball-mill machine. Transmission electron microscope was used to confirm the layers of graphene in ECG. The elemental analyses showed that the oxygen contents are different between ECG samples. The vibrational analysis of singleand five-layered graphene was conducted using finite element method within ANSY...
متن کاملA Non-linear Static Equivalent Model for Multi-layer Annular/Circular Graphene Sheet Based on Non-local Elasticity Theory Considering Third Order Shear Deformation Theory in Thermal Environment
In this paper, it is tried to find an approximate single layer equivalent for multi-layer graphene sheets based on third order non-local elasticity theory. The plates are embedded in two parameter Winkler-Pasternak elastic foundation, and also the thermal effects are considered. A uniform transverse load is imposed on the plates. Applying the non-local theory of Eringen based on third order she...
متن کاملRaman spectroscopy study of nano sheets of graphene and measurement of their resistivity
Graphene is a promising candidate for future high-speed electronics applications. It is a thin layer of pure carbon in which every atom is available for chemical reaction from two sides (due to the 2D structure). This is the only form of carbon (or solid material) with this characteristic feature. Graphene oxide (GO) was synthesized through the oxidation of graphite using the Hummer’s method, i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 108 19 شماره
صفحات -
تاریخ انتشار 2012