Electrical Conductivity and Raman Spectroscopy Measurements of Electrodes for LiFePO4 Battery

نویسندگان

  • Jared A. Hanley
  • Quinton L. Williams
چکیده

The benefit of LiFePO4 as a cathode material in rechargeable batteries has sparked considerable research interest. The 2015 Research Experience for Undergraduates (REU) in Physics at Howard University provided an opportunity to examine the electrical conductivity of carbon-coated LiFePO4.4-Point Probe resistivity testing shows that the cathode has an electrical conductivity value of σ=1.45 x 10−7 S/cm which is in good agreement with values reported in the common literature. In later research, an increase in magnitude to ∼ 10−4 S/cm is expected with the insertion of gold nano-particles. This could place the LiFePO4 combination in the class with high rate competitors such as LiCoO2 and LiMn2O4.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Why LiFePO4 is a safe battery electrode: Coulomb repulsion induced electron-state reshuffling upon lithiation.

LiFePO4 is a battery cathode material with high safety standards due to its unique electronic structure. We performed systematic experimental and theoretical studies based on soft X-ray emission, absorption, and hard X-ray Raman spectroscopy of LixFePO4 nanoparticles and single crystals. The results clearly show a non-rigid electron-state reconfiguration of both the occupied and unoccupied Fe-3...

متن کامل

Kinetic characteristics of mixed conductive electrodes for lithium ion batteries

The rate performances of four mixed conductive electrodes (Li4/3Ti5/3O4, LiFePO4, LiCoO2 and LiCo1/3Ni1/3Mn1/3O2) were investigated using alvanostatic charge/discharge, electrochemical impedance Spectroscopy (EIS) and galvanostatic intermittent titration (GITT). These four electrode aterials can be roughly divided into two groups according to the structure change during Li intercalation/extract...

متن کامل

Aqueous synthesis of LiFePO4 with Fractal Granularity

Lithium iron phosphate (LiFePO4) electrodes with fractal granularity are reported. They were made from a starting material prepared in water by a low cost, easy and environmentally friendly hydrothermal method, thus avoiding the use of organic solvents. Our method leads to pure olivine phase, free of the impurities commonly found after other water-based syntheses. The fractal structures consist...

متن کامل

Electrochemical in battery polymerization of poly(alkylenedioxythiophene) over lithium iron phosphate for high-performance cathodes.

A molecular wiring concept was induced in LiFePO4 cathodes by in battery polymerization methods. This was performed by the addition of alkylthiophene monomers over the LiFePO4-based cathode during the first charging step in lithium test cells. The driving force for the in battery polymerization of the monomers was supplied by the oxidizing current and by the physical contact of monomers with de...

متن کامل

Comparison of Binary and Ternary ‎Compositions of Ni-Co-Cu Oxides/VACNTs ‎Electrodes for Energy Storage Devices with ‎Excellent Capacitive Behaviour

   Electrochemical performance of binary and ternary oxides composed of Ni, Co and Cu produced over a 3-dimensional substrate of vertically aligned carbon nano-tubes (VACNT) as electrodes for aqueous energy sources, is reported and compared in this paper. VACNTs were fabricated inside a DC-plasma enhanced chemical vapor deposition chamber and composite materials fabricated by thermal decomp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015