Topology Optimisation Using MPBILs and Multi-Grid Ground Element
نویسندگان
چکیده
This paper aims to study the comparative performance of original multi-objective population-based incremental learning (MPBIL) and three improvements of MPBIL. The first improvement of original MPBIL is an opposite-based concept, whereas the second and third method enhance the performance of MPBIL using the multi and adaptive learning rate, respectively. Four classic multi-objective structural topology optimization problems are used for testing the performance. Furthermore, these topology optimization problems are improved by the method of multiple resolutions of ground elements, which is called a multi-grid approach (MG). Multi-objective design problems with MG design variables are then posed and tackled by the traditional MPBIL and its improved variants. The results show that using MPBIL with opposite-based concept and MG approach can outperform other MPBIL versions.
منابع مشابه
TOPOLOGY OPTIMIZATION OF 2D BUILDING FRAMES UNDER ARTIFICIAL EARTHQUAKE GROUND MOTIONS USING POLYGONAL FINITE ELEMENT METHOD
In this article, topology optimization of two-dimensional (2D) building frames subjected to seismic loading is performed using the polygonal finite element method. Artificial ground motion accelerograms compatible with the design response spectrum of ASCE 7-16 are generated for the response history dynamic analysis needed in the optimization. The mean compliance of structure is minimized as a t...
متن کاملSmooth Boundary Based Optimisation Using Fixed Grid
1. Abstract This paper presents a boundary based structural optimisation in the finite element fixed grid environment. The boundary is represented by smooth B-spline curves, as they typically require a relatively small number of control points to describe a curve. Utilising B-spline control points reduces the number of design variables whilst achieving a smooth boundary representation. An appro...
متن کاملTOPOLOGY OPTIMIZATION OF DOUBLE LAYER GRIDS FOR EARTHQUAKE LOADS USING A TWO-STAGE ESO-ACO METHOD
A two-stage optimization method is presented by employing the evolutionary structural optimization (ESO) and ant colony optimization (ACO), which is called ESO-ACO method. To implement ESO-ACO, size optimization is performed using ESO, first. Then, the outcomes of ESO are employed to enhance ACO. In optimization process, the weight of double layer grid is minimized under various constraints whi...
متن کاملDesign Optimization by Incremental Modification of Model Topology
Using a standard commercial package, case studies in shape optimisation were used to investigate rules and heuristics for identifying design variables for shape optimisation and incremental updates to the topology of a geometric model from finite element stress results. Topological modifications based on the classical Euler operations were used. The results indicate that intelligent interpretat...
متن کاملTopology Optimisation of Thermomechanical Functionally Graded Materials and Material Interfaces
The work applies topology optimisation to the design of functionally graded materials (FGMs) and materialinterfaces for thermomechanical problems. It is well known, that the mismatch in stiffness and thermal expansioncoefficient of two materials give rise to high stresses at the interface. One way to alleviate this is to use the conceptof FGMs [1]. The FGMs are here designed using t...
متن کامل