The Effect of an Alcohol Resistant Aqueous Film Forming Foam (AR-AFFF) on the Evaporation, Boiling, and Collision Dynamics of a Water Droplet on a Heated Solid Surface1

نویسندگان

  • Samuel L. Manzello
  • Jiann C. Yang
چکیده

An experimental study is presented for droplets containing an alcohol-resistant aqueous film forming foam (AR-AFFF) impacting and boiling on a heated stainless steel surface. Experiments with solutions of 3% (volume fraction) AR-AFFFldistilled water were compared to ones with distilled water and 3% AR-AFFF/simulated seawater. The latter experiments were motivated by the practice of mixing AR-AFFF with seawater in many naval applications. The impact process was recorded using a high-speed digital camera at loo0 frames per second. For each fluid, the droplet impact Weber number was fixed, and the droplet evaporation lifetime was measured as a function of temperature. Collision dynamics were investigated for each fluid, with the temperature of the stainless steel surface varied from film evaporation to film boiling. It was observed that the addition of 3% AR-AFFF to water reduced the temperature for departure from nucleate boiling and the Leidenfrost temperature dramatically compared to pure water. Droplets were observed to breakup violently for solutions of AR-AFFFlsimulated seawater at film boiling. The results demonstrate that the collision dynamics depend on what type of water is mixed with AR-AFFF. o MOZ msevier seieme (USA)

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Bubble/Droplet Morphology and Slippage on Attachment Induction Time in Deoiling Flotation Process

A modified model has been analytically developed to describe the induction time of an elliptic air bubble in contact with an elliptic hydrophobic oil droplet. The role of hydrophobicity was revealed in the slippage of liquid over the surfaces of bubble and droplet. In this condition, the analytical relationships for pressure distribution and consequently hydrodynamic resistance force through th...

متن کامل

Effect of nanostructures on evaporation and explosive boiling of thin liquid films: a molecular dynamics study

Molecular dynamics simulations have been employed to investigate the boiling phenomena of thin liquid films adsorbed on a nanostructured solid surface. The molecular system was comprised of the following: solid platinum wall, liquid argon, and argon vapor. A few layers of the liquid argon were placed on the nanoposts decorated solid surface. The nanoposts height was varied keeping the liquid fi...

متن کامل

Two Phase Flow Simulation for Subcooled Nucleat Boiling Heat Transfer Calculation in Water Jacket of Diesel Engine

Basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. Coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. An efficient approach to studying cooling system for diesel engine is a 3D computational fluid dynami...

متن کامل

Novel Kefiran-Polyvinyl Alcohol Composite Film: Physical, Mechanical and Rheological Properties

Background and Objectives: Kefiran (Kef) is a water-soluble polysaccharide that can form transparent film however, it is brittle. Therefore, in order to improve the mechanical properties of kefiran film, a mixture with other polymers can be offered. The expansion of mixed systems can propose kefiran and polyvinyl alcohol (PVOH) as a new composite film. Materials and Methods: Solutions of 20 gr...

متن کامل

Improving Water Spray Efficacy for Fire Suppression via CO2 Addition at High Pressures and Low Temperatures: Evidence for CO2 Clathrate Hydrate Formation

This paper describes a technique for achieving a compact aqueous spray that incorporates CO2 into the spray at low temperatures (T < 10 °C) and high pressures (P > 10 MPa). A high-pressure spray apparatus was used to explore the effects of temperature (4-25 °C), nominal CO2 mole fraction (0-0.12), in-line filter pore size (0.5-7 μm), and additives on the high-pressure (12-19 MPa) water spray pa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003