Product characteristics from the torrefaction of oil palm fiber pellets in inert and oxidative atmospheres.
نویسندگان
چکیده
The aim of this work was to study the characteristics of solid and liquid products from the torrefaction of oil palm fiber pellets (OPFP) in inert and oxidative environments. The torrefaction temperature and O2 concentration in the carrier gas were in the ranges of 275-350°C and 0-10 vol%, respectively, while the torrefaction duration was 30 min. The oxidative torrefaction of OPFP at 275°C drastically intensified the HHV of the biomass when compared to the non-oxidative torrefaction. OPFP torrefied at 300°C is recommended to upgrade the biomass, irrespective of the atmosphere. The HHV of condensed liquid was between 10.1 and 13.2 MJ kg(-)(1), and was promoted to 23.2-28.7 MJ kg(-)(1) following dewatering. This accounts for 92-139% improvement in the calorific value of the liquid. This reveals that the recovery of condensed liquid with dewatering is able to enhance the energy efficiency of a torrefaction system.
منابع مشابه
Biomass torrefaction characteristics in inert and oxidative atmospheres at various superficial velocities.
The reaction characteristics of four biomass materials (i.e. oil palm fiber, coconut fiber, eucalyptus, and Cryptomeria japonica) with non-oxidative and oxidative torrefaction at various superficial velocities are investigated where nitrogen and air are used as carrier gases. Three torrefaction temperatures of 250, 300, and 350 °C are considered. At a given temperature, the solid yield of bioma...
متن کاملTorrefaction and low temperature carbonization of oil palm fiber and Eucalyptus in nitrogen and air atmospheres.
Torrefaction is a pretreatment method for upgrading biomass as solid fuels. To provide flexible operations for effectively upgrading biomass at lower costs, the aim of this study was to investigate the properties of oil palm fiber and eucalyptus pretreated in nitrogen and air atmospheres at temperatures of 250-350°C for 1h. Based on energy and solid yield and introducing an energy-mass co-benef...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کاملOxidative torrefaction of biomass residues and densification of torrefied sawdust to pellets.
Oxidative torrefaction of sawdust with a carrier gas containing 3-6% O(2) was investigated in a TG and a fluidized bed reactor, with the properties of the torrefied sawdust and pellets compared with traditional torrefaction without any O(2), as well as the dry raw material. It is found that the oxidative torrefaction process produced torrefied sawdust and pellets of similar properties as normal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Bioresource technology
دوره 199 شماره
صفحات -
تاریخ انتشار 2016