A Full Adaptive Observer for DC Servo Motors
نویسنده
چکیده
An adaptive observer estimating all parameters and load torque is proposed for DC servo motors. The observer uses no direct feedback but the adaptation schemes use current and speed measurements. Both the observer and adaptations are simple to implement for real-time applications. Simulation results are satisfactory for the full adaptive observer. If the observer works in parallel with only load torque and armature resistance adaptations, the results are very good even if very low-quality sensors are used. In this simulation, only a single hall sensor is used as a rotational transducer, which produces a single pulse per revolution, and very high level noise and disturbance are added in order to provide a more realistic simulation.
منابع مشابه
Design Servo System Type and Positioning of Pole Observer Full Rank a Piezoelectric Servo Valve without Integrator
In this paper, the method of modern control approach for the design of controller and observer is used. Other functions such as neural controllers - or fuzzy sliding mode control can be found in this work and the results are compared. First, a dynamic model of the servo valve is intended for the governing equations in state-space form expression are obtained. Due to the system integrator is exp...
متن کاملAlgebraic Observer to Estimate Unmeasured State Variables of DC Motors
In this article, an original algebraic method is used for the estimation of state variables. The estimation is used to implement a position control scheme for DC motors. In addition, the estimation of the Coulomb’s friction coefficient of the servo motor model is also investigated. The approach is based on elementary algebraic manipulations which lead to specific formulaes for the unmeasured st...
متن کاملIdentification and Adaptive Position and Speed Control of Permanent Magnet DC Motor with Dead Zone Characteristics Based on Support Vector Machines
In this paper a new type of neural networks known as Least Squares Support Vector Machines which gained a huge fame during the recent years for identification of nonlinear systems has been used to identify DC motor with nonlinear dead zone characteristics. The identified system after linearization in each time span, in an online manner provide the model data for Model Predictive Controller of p...
متن کاملTorque Control for DC Servo Motor Using Adaptive Load Torque Compensation
A torque control system is an important process in industries. The value of torque which is generated by DC servomotor depends upon a motor current. Since the torque control system uses the estimated current from an observer, it will receive an effect from torque disturbance (load torque) during an operation. The incorrect estimated current from the observer affects a current feedback signal. T...
متن کاملAdaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory
In this paper, based on feedback linearization control method and using a special PI (propotational integrator) regulator (IP) in combination with a feed-forward controller, a three-phase induction servo-drive is speed controlled. First, an observer is employed to estimate the rotor d and q axis flux components. Then, two input-output state variables are introduced to control the dynamics of to...
متن کامل