Layer-by-layer etching of GaAs „110... with halogenation and pulsed-laser irradiation

نویسندگان

  • B. Y. Han
  • C. Y. Cha
چکیده

We have investigated the effect of laser irradiation on the terrace morphology of Br-covered GaAs ~110!. Layer-by-layer etching of GaAs ~110! is demonstrated through laser-induced etching and atomic desorption. Nanosecond pulsed-laser irradiation ~hn52.3 eV, pulse power ;35 mJ cm! of Br–GaAs ~110! initially produces a high density of small, single-layer etch pits as Br is consumed. Continued laser irradiation causes Ga and As desorption from pit edges so that pits grow and thereby remove the remnant of the top GaAs layer. When there is Br on the surface, pit growth reflects the Br chemisorption structure ~elongated along @001#! but subsequent atom desorption favors growth along @11̄0#. © 1998 American Vacuum Society. @S0734-2101~98!01502-4#

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching

In this paper metal-assisted chemical etching has been applied to pattern porous silicon regions and silicon nanohole arrays in submicron period simply by using positive photoresist as a mask layer. In order to define silicon nanostructures, Metal-assisted chemical etching (MaCE) was carried out with silver catalyst. Provided solution (or materiel) in combination with laser interference lithogr...

متن کامل

GaAs-GaAlAs Double-Heterostructure Injection Lasers with Distributed Feedback

GaAs-GaAlAs double-heterostructure distributed-feedback injection lasers are investigated a t temperatures between 80 and 150 K under pulsed operation. The optical feedback for laser oscillation is provided by a corrugated interface between the p-GaAs active layer and the pGaA1As layer. The corrugation is made by two methods, ion milling and chemical etching, and the latter method is found to g...

متن کامل

Effect of Pulsed Infrared Low- Level Laser Irradiation on Open Skin Wound Healing of Healthy and Streptozotocin Induced Diabetic Rats by a Biomechanical Evaluating Method

Purpose: The aim of present study is to evaluate the effect of a pulsed infrared low-level laser on wound healing in an experimental induced diabetic rat model.Materials and Methods: 18 adult rats were divided into 2 healthy and 1 diabetic groups. Diabete was induced by intraperitoneal administration of streptozotosin in diabetic group. Two full - thickness skin incisions were made on the dorsu...

متن کامل

Ferromagnetic Ga1ÀxMnxAs produced by ion implantation and pulsed-laser melting

We demonstrate the formation of ferromagnetic Ga12xMnxAs films by Mn ion implantation into GaAs followed by pulsed-laser melting. Irradiation with a single excimer laser pulse results in the epitaxial regrowth of the implanted layer with Mn substitutional fraction up to 80% and effective Curie temperature up to 29 K for samples with a maximum Mn concentration of x'0.03. A remanent magnetization...

متن کامل

Influence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding

This work studied the effect of additions of carbon dioxide to argon shielding gas on the weld shape and microstructure of ST14 steel in pulsed Nd: YAG laser welding. By additions of carbon dioxide up to 15%,the weld area and depth/width ratio decreases while rising of carbon dioxide up to 25% causes increasing of weld area and depth/width ratio. It is observed that the weld metal microstructur...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1998