Mean Velocity, Turbulence Intensity and Turbulence Convection Velocity Measurements for a Convergent Nozzle in a Free Jet Wind Tunnel

نویسندگان

  • C. J. McColgan
  • R. S. Larson
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Laser-Doppler measurements on a round turbulent jet in dilute polymer solutions

A laser-Doppler velocimeter suitable for the measurement of mean and fluctuating flow velocities in water is described. Results of a study using this system in an axisymmetric turbulent jet of water and dilute polymer solutions are given. The laser-Doppler technique is better suited for such measurements than either Pitot tubes or heat-transfer gauges because the Doppler velocity measurements a...

متن کامل

Mean Velocity and Static Pressure in a Sharp-edge Circular Nozzle Jet

An axisymmetric jet issued from a sharp edged circular convergent nozzle has been studied experimentally in the near field at Reynolds number 5.3x104  to search the saddle shape behavior of mean velocity and the role of mean static pressure in the jet flow. Due to the vena contracta effect the centerline mean velocity of the jet increases about 4.2% of its exit value and corresponding decrease ...

متن کامل

Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow

The study of interactions of jet into cross flow at different longitudinal and transverse angles of jet was studied. The following components were designed and constructed: a low velocity wind tunnel to produce the uniform flow, a flat plate with a traverse injection system to simulate the jet injection, and a spatial rake to measure the total pressure. The tests were carried out at longitudina...

متن کامل

Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow

The study of interactions of jet into cross flow at different longitudinal and transverse angles of jet was studied. The following components were designed and constructed: a low velocity wind tunnel to produce the uniform flow, a flat plate with a traverse injection system to simulate the jet injection, and a spatial rake to measure the total pressure. The tests were carried out at longitudina...

متن کامل

Experimental and Numerical Study of Jet Mixing from a Shock-Containing Nozzle

The compressible jet plume emerging from a planar convergent–divergent nozzle containing a separation shock is investigated experimentally and numerically. The investigation encompasses exit-to-throat area ratios (Ae=At) from 1.0 to 1.8 and nozzle pressure ratios from 1.2 to 1.8. Experiments were conducted in a variable-geometry nozzle facility, and computations solved the Reynolds-averaged Nav...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000