Effect of pretreatment of AAO template on NiCoFe Nanowires Synthesized by Electroless Deposition
نویسندگان
چکیده
The influence of pretreatment of AAO template and deposition process on magnetic NiCoFe nanowire fabricated by electroless method was investigated. The Electroless process carried out at room temperature using DMAB as a reductant agent. SEM and EDX analysis used to characterize the deposited sample. According to the results, sonication during deposition process is not recommended in fabrication of metallic nanowires or nanotubes.
منابع مشابه
Investigations of Microstructures and Magnetic Properties through Off-time between Pulses and Controlled Cu Content in Pulse Electrodeposited NiCu Nanowires
NiCu alloy nanowires arrays were embedded into the anodic aluminum oxide (AAO) template by ac-pulse electrodeposition. Different off-time were used in electrolyte with constant concentration of Ni and Cu and acidity of 3. The effect of deposition parameters on alloy contents was investigated by studying the microstructure and magnetic properties of as-deposited NiCu alloy nanowires. Atomic forc...
متن کاملArea Effect of Reflectance in Silicon Nanowires Grown by Electroless Etching
This paper shows that the reflectance in silicon nanowires (SiNWs) can be optimized as a function of the area of silicon substrate where the nanostructure growth. SiNWs were fabricated over four different areas of silicon substrates to study the size effects using electroless etching technique. Three different etching solution concentrations of silver nitrate (AgNO3) and hydroflu...
متن کاملبررسی تغییرات پارامترهای ساختاری نانوسیمهای مغناطیسی نیکل بر بازده الکترونهشت
In this work, magnetic Ni nanowire arrays were ac-pulse electrodeposited into the anodic aluminum oxide (AAO) template fabricated by the common two-step anodization technique. The barrier layers at the bottom of the pores were exponentially thinned in a non-equilibrium anodization process to 8, 12, 16 and 20 V. These were fabricated using the constant of 15 mA deposition current, 48 mS off-tim...
متن کاملOptimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology
Anodic aluminum oxide (AAO) fabricated by two step anodization technique, is used as a template to synthesize FeCo nanowire arrays by AC electrodeposition technique. Response surface methodology (RSM) is applied to design the experiments, fit an empirical model and optimize the conditions to achieve the best magnetic properties. The magnetic properties, pore dimensions, composition and structur...
متن کاملPretreatment Effect on the Properties of Electroless Nano - Crystalline Nickel Phosphorous Coating
the influence of mechanical polishing pre-treatments on steel substrates is investigated in terms of microstructure, deposition rate, adhesion, mechanical and corrosion properties of electroless Ni-P nanocoating with 9-10% wt. of P content. XRD analysis of Ni-P coatings demonstrated the nanocrystalline structure of coating with the grain size of 39 nm. Results showed that pretreatment of substr...
متن کامل