First Approach for the Modelling of the Electric
نویسندگان
چکیده
OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible. This paper is about an open multi-physics modelling problem resulting from recent investigations into plasma generation by piezo-electric transformers. In this first approach, the electric field distribution surrounding the transformer is studied according to a weak coupling formulation. Electric potential distribution views obtained numerically are compared to real views of plasma generation observed experimentally.
منابع مشابه
Intelligent Power Control of Green Building-Integrated of Fuel Cell and Plug-in Electric Vehicle in Smart Distribution Systems
The renewable energy sources and plug-in electric vehicles (PEVs) are becoming very popular because of the combination of high fuel costs and concerns about emission issues. This paper presents modelling and control of a Building Integrated Fuel Cell and Plug-in Electric Vehicles (BIFC-PEV) in smart distribution systems. In BIFC-PEV system, conventional building elements could be replaced by sp...
متن کاملOptimizing the AGC system of a three-unequal-area hydrothermal system based on evolutionary algorithms
This paper focuses on expanding and evaluating an automatic generation control (AGC) system of a hydrothermal system by modelling the appropriate generation rate constraints to operate practically in an economic manner. The hydro area is considered with an electric governor and the thermal area is modelled with a reheat turbine. Furthermore, the integral controllers and electri...
متن کاملSignificant Characteristics of Multi Carrier Energy Networks for Integration of Plug-In Electric Vehicles to Electric Distribution Network
One of the big concerns of big cities is facing with the increase of fossil fuel vehicles in the roads. The cars intensify greenhouse gas emission in civic centers. One approach to reduce the emission is replacing the cars by Plug-In Electric Vehicles (PEVs). In spite of reducing the emission, PEVs have some adverse effect on electric distribution networks. Technical challenges such as load and...
متن کاملModelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects
The damping ratio of chassis suspension is a key parameter for damping matching of in-wheel motor vehicles (IWMVs). Because the motor is attached to the driving wheel, the initial design method of the damping ratio for traditional cars is not entirely suitable for IWMVs. This paper proposes an innovative initial design method of the damping ratio for IWMVs. Firstly, a traveling vibration model ...
متن کاملMechanical System Modelling of Robot Dynamics Using a Mass/Pulley Model
The well-known electro-mechanical analogy that equates current, voltage, resistance, inductance and capacitance to force, velocity, damping, spring constant and mass has a shortcoming in that mass can only be used to simulate a capacitor which has one terminal connected to ground. A new model that was previously proposed by the authors that combines a mass with a pulley (MP) is shown to simulat...
متن کاملImproving the Energy Management of Parallel Hybrid Electric Vehicle by Dynamic Programming Using Electro-Thermal Model of Battery
In this paper, an offline energy management system (EMS) is proposed for parallel hybrid electric vehicles (HEVs). The proper energy management system is necessary for dividing torque between electrical motor and Internal Combustion Engine (ICE). The battery is a crucial component of hybrid electric vehicles and affects significantly the cost and the performance of the whole vehicle. The primar...
متن کامل