Velocity dependent friction laws in contact mode atomic force microscopy.
نویسندگان
چکیده
Friction forces in the tip-sample contact govern the dynamics of contact mode atomic force microscopy. In ambient conditions typical contact radii between tip and sample are in the order of a few nanometers. In order to account for the large interaction area the dynamics of contact mode atomic force microscope (AFM) is investigated under the assumption of a multi-asperity contact interface between tip and sample. Thus, the kinetic friction force between tip and sample is the product of the real contact area between both solids and the interfacial shear strength. The velocity strengthening of the lateral force is modeled assuming a logarithmic relationship between shear-strength and velocity. Numerical simulations of the system dynamics with this empirical model show the existence of two different regimes in contact mode AFM: steady sliding and stick-slip where the tip undergoes periodically stiction and kinetic friction. The state of the system depends on the scan velocity as well as on the velocity dependence of the interfacial friction force between tip and sample. Already small viscous damping contributions in the tip-sample contact are sufficient to suppress stick-slip oscillations.
منابع مشابه
Atomic-scale Studies of Friction and Nano- Indentation
The development of Scanning Force Microscopy has provided us with tools to study friction and wear on the nanometer scale. The atomic granularity of matter shows up in the lateral force which is necessary to slide a small contact over a flat surface. Also, mechanical damage of a sample surface can be monitored with monolayer resolution [1]. The laws which determine the dependence of friction on...
متن کاملNon-contact Friction Force Microscopy Exploiting Lateral Resonance Enhancement
A method for sensing the dissipation occurring when a sharp atomic force microscopy (AFM) tip is oscillated laterally above a surface at distances typical of non-contact mode AFM operation is established and demonstrated. Dissipation is detected by measuring the damping of lateral resonant modes of the AFM cantilever, excited independently after the lateral resonant mode identification, when th...
متن کاملNanometer-Scale Patterning on PMMA Resist by Force Microscopy Lithography
Nanoscale science and technology has today mainly focused on the fabrication of nano devices. In this paper, we study the use of lithography process to build the desired nanostructures directly. Nanolithography on polymethylmethacrylate (PMMA) surface is carried out by using Atomic Force Microscope (AFM) equipped with silicon tip, in contact mode. The analysis of the results shows that the ...
متن کاملNovel operation mode for eliminating influence of inclination angle and friction in atomic force microscopy.
The accuracy of topography imaging in contact force mode of atomic force microscopy (AFM) depends on the one-to-one corresponding relationship between the cantilever deflection and the tip-sample distance, whereas such a relationship cannot be always achieved in the presence of friction and incline angle of sample surface. Recently, we have developed a novel operation mode in which we keep the ...
متن کاملScanning speed phenomenon in contact-resonance atomic force microscopy
This work presents data confirming the existence of a scan speed related phenomenon in contact-mode atomic force microscopy (AFM). Specifically, contact-resonance spectroscopy is used to interrogate this phenomenon. Above a critical scan speed, a monotonic decrease in the recorded contact-resonance frequency is observed with increasing scan speed. Proper characterization and understanding of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Ultramicroscopy
دوره 100 3-4 شماره
صفحات -
تاریخ انتشار 2004