Non Destructive Testing of Cetris-basic Wood- Cement Chipboards by Using Impedance Spectroscopy
نویسندگان
چکیده
Impedance spectroscopy (IS) is a non-destructive testing (NDT) method [4,5,7] ranking in the electrical engineering measuring method group. It outputs data providing information on material electric and dielectric properties. Microscopically inhomogeneous materials are frequently used in the building industry. Unfortunately, the impedance spectroscopy results and their characterization on the basis of this method are not unambiguous. The frequency spectrum behaviour of Cetris-basic specimens was studied by means of the NDT impedance spectroscopy method for various water content values. A stress cycle with defined absolute water content values is described. Effects of potential dielectric losses and the predominance of the polarization and conductivity components in various regions of the impedance spectrum are described for various water content values. So dry specimen pre-stress and post-stress liquid nitrogenous cycle tan (f) (loss factor) spectrum variances were observed.
منابع مشابه
Impedance Spectroscopy Study of the Effect of Environmental Conditions on the Microstructure Development of Sustainable Fly Ash Cement Mortars
Today, the characterisation of the microstructure of cement-based materials using non-destructive techniques has become an important topic of study, and among them, the impedance spectroscopy has recently experienced great progress. In this research, mortars with two different contents of fly ash were exposed to four different constant temperature and relative humidity environments during a 180...
متن کاملThickness Measuring of Thin Metal by Non Destructive with Fuzzy Logic Control System
Non-Destructive Testing & Evaluation methods are developed to inspect and investigate materials and structures. Ultrasonic Testing is an NDT method can be used for measuring the thickness of objects, as one of its significant applications. The objective of this paper is designing and applying an intelligent UT fuzzy control system for evaluating the thickness of thin metal objects in a range of...
متن کاملThickness Measuring of Thin Metal by Non Destructive with Fuzzy Logic Control System
Non-Destructive Testing & Evaluation methods are developed to inspect and investigate materials and structures. Ultrasonic Testing is an NDT method can be used for measuring the thickness of objects, as one of its significant applications. The objective of this paper is designing and applying an intelligent UT fuzzy control system for evaluating the thickness of thin metal objects in a range of...
متن کاملInfluence of Silica Fume Addition in the Long-Term Performance of Sustainable Cement Grouts for Micropiles Exposed to a Sulphate Aggressive Medium
At present, sustainability is of major importance in the cement industry, and the use of additions such as silica fume as clinker replacement contributes towards that goal. Special foundations, and particularly micropiles, are one of the most suitable areas for the use of sustainable cements. The aim of this research is to analyse the effects in the very long-term (for 600 days) produced by sul...
متن کاملDesign of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کامل