Zinc, nickel, and cobalt ions removal from aqueous solution and plating plant wastewater by modified Aspergillus flavus biomass: A dataset
نویسندگان
چکیده
The biomass of Aspergillus flavus was modified by calcium chloride to achieve a bioadsorbent for treating nickel, cobalt, and zinc ions from aqueous solutions. The information of pH, bioadsorbent dose, contact time, and temperature effect on the removal efficiency are presented. The data of Freundlich and Langmuir isotherm and pseudo-first-order and pseudo-second-order kinetic models are also depicted. The data showed that the maximum bioadsorption capacity of nickel, cobalt, and zinc ions is 32.26, 31.06 and 27.86 mg/g, respectively. The suitability of the bioadsorbent in heavy metals removal at field condition was tested with a real wastewater sample collected from a plating plant in the final part of this dataset. Based on the findings, the bioadsorbent was shown to be an affordable alternative for the removal of metals in the wastewater.
منابع مشابه
Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology
Presence of heavy metal ions in wastewater is an important public concern. Adsorption are commonly used technique to remove various pollutants, including the ions, from contaminated water sources. However, common methods for adsorption are not completely efficient at low ion concentrations and the adsorbent should be improved in order to reaching the acceptable levels of adsorption efficiency. ...
متن کاملBiosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium
The biosorption of heavy metals can be an effective process for the removal of such metal ions from aqueous solutions. In this study, the adsorption properties of nonliving biomass of phanerochaete chrysosporium for Pb (II) and Zn (II) were investigated by the use of batch adsorption techniques. The effects of initial metal ion concentration, initial pH, biosorbent concentration, stirring speed...
متن کاملSynthesized some copolymer derivative of poly (Styrene –alternative- Maleic Anhydride) (SMA) for removal Cobalt (II) ions from aqueous solutions and determination residual cobalt (II) ions by using spectrophotometric method
Chelating resins have been considered to be suitable materials for the recovery of heavy metals in water treatments. A chelating resin based on modified poly(styrene-alt-maleic anhydride) with Melamine was synthesized. This modified resin was further reacted with 1,2-diaminoethan in the presence of ultrasonic irradiation for the preparation of a tridimensional chelating resin on the nanoscale f...
متن کاملکارآیی حذف کروم، نیکل، روی و کدورت از فاضلاب صنایع آبکاری به روش الکتروکوآگولاسیون
Background and purpose: Heavy metals such as chromium, nickel, and zinc are the most common contaminants found in the plating wastewater that cause environmental pollution due to non-biodegradability. This study investigated the removal of chromium, nickel, zinc and turbidity from wastewater of plating and galvanized industries by electrocoagulation technology. Material and methods: This study...
متن کاملBiosorption of hexavalent chromium in a tannery industry wastewater using fungi species
The isolated fungi species of different kinds from chromium contaminated soil sites located in Nagalkeni, Chennai were used for reducing chromium(VI) in a tannery industry wastewater of Nagalkeni, Chennai. The experiments were conducted to know biosorption potential of isolated fungi species for removing chromium(VI) in a tannery industry wastewater against the different pH, fungi biomass and ...
متن کامل