Particle-In-Cell Based Parameter Study of 12-Cavity, 12-Cathode Rising-Sun Relativistic Magnetrons for Improved Performance
نویسندگان
چکیده
This Article is brought to you for free and open access by the Electrical & Computer Engineering at ODU Digital Commons. It has been accepted for inclusion in Electrical & Computer Engineering Faculty Publications by an authorized administrator of ODU Digital Commons. For more information, please contact [email protected]. Repository Citation Majzoobi, Alireza; Joshi, R. P.; Neuber, A. A.; and Dickens, J. C., "Particle-In-Cell Based Parameter Study of 12-Cavity, 12-Cathode Rising-Sun Relativistic Magnetrons for Improved Performance" (2015). Electrical & Computer Engineering Faculty Publications. 69. http://digitalcommons.odu.edu/ece_fac_pubs/69
منابع مشابه
MIPROWAVE EMISSION FROM PULSED, RELATIVISTIC e-BEAM DIODES II. THE MULTIRESONATOR MAGNETRON
The design and operating characteristics of relativistic, electron beam magnetrons are described. The magnetrons are comprised of a pulsed field-emission cathode (-360kV, ~15kA, -30nsec) and several coupled resonators embedded in the anode block. The tubes are designed to work at fixed frequency, in range from 2.3 to 5GHz. The peak powers generated are typically 500 to 1000MW. *This work was su...
متن کاملImpact of anisotropy level of gas diffusion layer on the temperature distribution of a PEM fuel cell cathode electrode
Proton exchange membrane (PEM) fuel cells being employed in fuel cell vehicles (FCVs) are promising power generators producing electric power from fuel stream via porous electrodes. Structure of carbon paper gas diffusion layers (GDLs) applying in the porous electrodes can have a great influence on the PEM fuel cell performance and distribution of temperature, especially at the cathode side whe...
متن کاملEffect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system
In this study, the effect of recycling fuel cell products on the performance of a solid oxide fuel cell and gas turbine (SOFC-GT) hybrid system was investigated. Three types of products recycling are considered: cathode products recycling (CPR), anode products recycling (APR), and both cathode and anode products recycling (BACPR). In the present work, operating temperature and limiting curre...
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملApplication of dual chamber microbial fuel cell with aeration cathode for bioelectricity generation and simultaneous industrial wastewater treatment
Background and Objective: Microbial fuel cell (MFC) is a new green technology that uses the catabolic ability of microorganisms to produce bioenergy while simultaneously removing organic matter and other wastewater contaminants. Electrode material is one of the factors affecting the performance of microbial fuel cells. The aim of this study was to investigate the performance of microbial fuel c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017