Realization of Fir Filter Using Modified Distributed Arithmetic Architecture
نویسنده
چکیده
This paper presents an efficient implementation of Finite Impulse Response Filter (FIR) using Distributed Arithmetic (DA) architecture. Here, the multipliers in FIR filter are replaced with multiplierless DA based technique. The DA based technique consists of Look Up Table (LUT), shift registers and scaling accumulator. Analysis on the performance of various filter orders with various partitions on different address length of partial tables are done using Xilinx 12.3 synthesis tool. The proposed architecture provides an efficient area-time-power implementation which involves significantly less latency and less area-delay complexity when compared with existing structures for FIR Filter.
منابع مشابه
Memory Efficient Architecture For High Speed Fir Filter Using Distributed Arithmetic
This paper presents the realization of memory efficient architecture using Distributed Arithmetic (DA) for implementation of Finite Impulse Response (FIR) filter. Here, the multipliers in FIR filter are replaced with multiplier less DA based technique. First, the theory of DA is described. In this technique, pre-computed values of inner product are stored in LUT, which are further added and shi...
متن کاملA Novel Approach of Area-Efficient FIR Filter Design Using Distributed Arithmetic with Decomposed LUT
Abstract: In this paper, a highly area-efficient multiplier-less FIR filter is presented. Distributed Arithmetic (DA) has been used to implement a bit-serial scheme of a general asymmetric version of an FIR filter, taking optimal advantage of the 3-input LUT-based structure of FPGAs. The implementation of FIR filters on FPGA based on traditional arithmetic method costs considerable hardware res...
متن کاملDesign and Implementation of 31- Order Fir Low-pass Filter Using Modified Distributed Arithmetic Based on Fpga
This paper provide the principles of Modified Distributed Arithmetic, and introduce it into the FIR filters design, and then presents a 31-order FIR low-pass filter using Modified Distributed Arithmetic, which save considerable MAC blocks to decrease the circuit scale, meanwhile, divided LUT method is used to decrease the required memory units and pipeline structure is also used to increase the...
متن کاملDesign and implementation of DDA architecture for FIR Filters
Traditionally, direct implementation of a K-tap FIR filter requires K multiply-and-accumulate (MAC) blocks, which are expensive to implement in FPGA due to logic complexity and resource usage. To resolve this issue, we first present DA, which is a architecture without multiplier. This paper implements the DA architecture. This architecture is applicable to only one type of filter Coefficients i...
متن کاملDistributed Arithmetic Unit Design for Fir Filter
In this paper different distributed Arithmetic (DA) architectures are proposed for Finite Impulse Response (FIR) filter. FIR filter is the main part of the Digital Signal Processing. In Digital Signal Processing we can use Multiply Accumulator Circuit (MAC) and DA for filter design.MAC consumes more power and area because of multiplier and adder circuit. The design distributed arithmetic is run...
متن کامل