Anisotropic Nonlinear Elastic Model of Concrete and Secondary Development in ABAQUS
نویسندگان
چکیده
Abstract: In order to solve the convergence problem of concrete constitutive in the softening phase, an anisotropic nonlinear elastic constitutive model (ANECM) was proposed, which was developed based on the uniaxial concrete constitutive relation in the Chinese code for design of concrete structures (GB 50010-2010). The user material subroutine (UMAT) based on ANECM is developed in ABAQUS software. The above UMAT is applied to analyze a simulation model in ABAQUS software. The result shows that compared to the default plastic-damage concrete constitutive in ABAQUS, ANECM is an effective and appropriate model to simulate the performance of concrete and it has improved the convergence problem.
منابع مشابه
Modelling Anisotropic, Hyperelastic Materials in ABAQUS
ABAQUS offers the possibility to model non-linear isotropic materials as well as linear anisotropic materials. However, it is not possible to use these two capabilities at the same time in order to model anisotropic hyperelastic materials. Gurvich proposed to model such materials by means of the linear superposition of two fictitious materials: a linear anisotropic, and a hyperelastic isotropic...
متن کاملSeismic Retrofitting RC Structures with Precast Prestressed Concrete Braces- ABAQUS FEA Modeling
Precast prestreesed concrete braces are a new method for seismic strength of Concrete Structures which has the following benefits: a) no wet concrete work in construction site b) No bolt or anchorage to the existing frame c) easy to apply d) short construction period e) low construction cost, to evaluate seismic performance of strengthened structure a model consist of existing frame and concret...
متن کاملThe Effect of Axial Force Variations on Nonlinear Modeling and Seismic Response of Reinforced Concrete Structures
In order to increase the accuracy of evaluating seismic response of structures, it is critical to conduct dynamic analyses based upon precise nonlinear models being as consistent as possible with the real conditions of corresponding structures. The concentrated plasticity model including one elastic element and two nonlinear spring elements at both ends has been considered within the research c...
متن کاملThe Attitude of Variation of Elastic Modules in Single Wall Carbon Nanotubes: Nonlinear Mass-Spring Model
The examination of variation of elastic modules in single wall carbon nanotubes (SWCNTs) is the aim of this paper. Full nonlinear spring-like elements are employed to simulate specific atomic structures in the commercial code ABAQUS. Carbon atoms are attached to each node as a mass point using atomic mass of carbon atoms. The influence of dimensions such as variation of length, diameter, aspect...
متن کاملA Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls
Architectural limitations in many situations make it necessary for the RC shear walls to be extended in plan in different directions at a single location that makes them a 3D configuration. Analysis of such walls is very challenging. In this research about 450 cases of 3D shear walls are considered with different shapes and heights. L, T and H-shape walls are studied. They are nonlinearly analy...
متن کامل