Nonlinear Receding Horizon Control of Thickness and Tension in a Tandem Cold Mill with a Variable Rolling Speed
نویسندگان
چکیده
1) Mitsubishi Heavy Industries, Ltd., 1-1 Shinhama, 2-chome, Arai-cho, Takasago City, Hyogo, 676-8686 Japan. 2) Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka, 560-8531 Japan. 3) Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya-shi, Aichi, 464-8603 Japan. 4) Graduate School of Engineering, Tottori University, 4-101 Koyama-Minami, Tottori, 680-8552 Japan. 5) Kobe Steel, Ltd., 1-5-5 Takatsukadai, Nishi-ku, Kobe, Hyogo, 651-2271 Japan.
منابع مشابه
Computation of Rolling Stand Parameters by Genetic Algorithm
Mathematical model of rolling process is used at cold mill rolling on tandem mills in metallurgy. The model goal is to analyse rolling process according to process data measured on the mill and get immeasurable variables necessary for rolling control and optimal mill pre-set for next rolled coil. The values obtained by model are used as references for superimposed technology controllers (thickn...
متن کاملA comparison of two set-up generation systems for cold rolling mills
Set-up generation is an important aspect in the operation of tandem cold mills. It defines speeds and powers for the drives, stand reductions, roll forces and interstand tensions for the tandem cold mill control system. Set-up optimization should lead to improved thickness regularity, surface finish and shape performance of the strip. The importance of such optimization first appeared in (1) an...
متن کاملOptimization of Reduction Settings and Inter-stand Tensions for Tandem Cold Mills using Genetic Algorithm
Cold rolling process is a complicated process which can be optimized by changing in variables and settings. This paper presents a set-up optimization system developed to calculate reductions and inter-stand tensions for each stand of a five stand tandem cold mill. The main objective in this optimization is minimization of power consumption. First, by using the analytical method, the equations ...
متن کاملNumerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
Cold rolling process of a major transformation in the form of sheet metal and a wide range of steel products are produced in this way. Elastic deformation during cold rolling working rollers and the inevitable increase in the rolling force. In this study, the effect of elastic deformation during cold rolling mill rollers working on the reciprocating back and forth in tandem with the presence of...
متن کاملImproved Drive Control for Multi-Stand Cold Rolling Mills
In multi-stand cold rolling mills an accurate synchronization of the mill drives is necessary for a good product quality and for a safe process operation. During the standard commissioning procedure the control performance of each drive is optimized individually. However, in normal operation mode the performance is then not always optimal due to the coupling of the drives by the strip being rol...
متن کامل