Size distribution and speciation of chromium in paint spray aerosol at an aerospace facility.
نویسندگان
چکیده
Spray painters are potentially exposed to aerosol containing Cr(VI) via inhalation of chromate-based paint spray. Two field studies were conducted at an aerospace facility to determine the size distribution and speciation of Cr(VI) in paint spray aerosol. Sampled paint products consisted of sparingly soluble strontium chromate in an epoxy resin matrix, a matrix generally known for its durability and toughness. Personal aerosol samples were collected using Sierra Marple personal cascade impactors and analyzed for Cr(VI) and total Cr. The size distribution of total Cr particles in the paint aerosol had a Mass Median Aerodynamic Diameter (MMAD) of 7.5 mum [Geometric Standard Deviation (GSD = 2.7 mum)] in both field studies. The MMAD of Cr(VI) particles was 8.5 mum (GSD = 2.2 mum). Particles >2 mum constituted 90% or more of the total Cr and the Cr(VI) mass, in all sampled paint aerosols and were lognormally distributed. The target site for respiratory deposition of Cr in the aerosol was estimated based on the mass distribution of Cr according to particle size. On an average, 62% of the Cr and Cr(VI) mass in the paint aerosol consisted of particles >10 mum. This study showed that 71.8% of Cr(VI) mass in paint spray aerosol potentially inhaled by a spray painter may deposit in the head airways region. Only 2.0 and 1.4% of Cr(VI) mass in the paint aerosol may potentially deposit in the alveolar and tracheobronchial region, respectively. The ratio of Cr(VI) mass to total Cr mass was determined in bulk paint and the data indicate that Cr was predominantly in the Cr(VI) valence state, before spraying. The ratio of Cr(VI) mass to total Cr mass was also determined in paint aerosol samples. The data indicated that there was a reduction of Cr(VI) regardless of Cr aerosol particle size. Cr(VI) reduction occurred most likely during the 8 h sample collection time period. These findings are in agreement with the findings that observed Cr(VI) reduction during collection of airborne Cr(VI) in samples of chromic acid mist. The use of Cr(VI) stabilizing sampling media and the storage of samples at lower temperatures (4 degrees C ) during and after sampling may avoid the underestimation of Cr(VI).
منابع مشابه
Size distribution of chromate paint aerosol generated in a bench-scale spray booth.
Spray painters are potentially exposed to aerosols containing hexavalent chromium [Cr(VI)] via inhalation of chromate-based paint sprays. Evaluating the particle size distribution of a paint spray aerosol, and the variables that may affect this distribution, is necessary to determine the site and degree of respiratory deposition and the damage that may result from inhaled Cr(VI)-containing pain...
متن کاملDetermination of Aerosol Particle Size Distribution using Electrical Differential Mobility Analyzer (DMA)
Introduction: Determining the size distribution of the particles for assessing their effects on human health and their control mechanisms is very effective. One of the most important equipment used in determining particle size distribution is the DMA. In this study, in addition to the design and construction of a DMA, the size distribution measurement of aerosol particles was carried out. Mate...
متن کاملInvestigation of Physical Effects on Nanoparticle Size in Aerosol Solvent Extraction System
Aerosol solvent extraction system (ASES) was used to prepare micro-particle of acetaminophen by supercritical carbon dioxide as an anti-solvent. Experiment was carried out at various temperatures, pressures, solvents and investigated the effects of these parameters on particle size, size distribution and morphology by SEM and laser diffraction particle size analyzer. It seems that the choice of...
متن کاملExposure Assessment Suggests Exposure to Lung Cancer Carcinogens in a Painter Working in an Automobile Bumper Shop
A 46-year-old man who had worked as a bumper spray painter in an automobile body shop for 15 years developed lung cancer. The patient was a nonsmoker with no family history of lung cancer. To determine whether the cancer was related to his work environment, we assessed the level of exposure to carcinogens during spray painting, sanding, and heat treatment. The results showed that spray painting...
متن کاملCar paint thickness control using artificial neural network and regression method
Struggling in world's competitive markets, industries are attempting to upgrade their technologies aiming at improving the quality and minimizing the waste and cutting the price. Industry tries to develop their technology in order to improve quality via proactive quality control. This paper studies the possible paint quality in order to reduce the defects through neural network techniques in au...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Annals of occupational hygiene
دوره 49 1 شماره
صفحات -
تاریخ انتشار 2005