Rf Deflectors Design for Tesla Damping Ring
نویسندگان
چکیده
The paper illustrates some considerations concerning the design of RF Deflectors for TESLA Damping Ring. Scaling laws are applied to investigate the RF Deflector properties in term of length, filling time and dissipated power as a function of the iris diameter. Two optimized cells operating on the 3 / π and 2 / π modes are finally shown.
منابع مشابه
Tesla Damping Ring: Injection/extraction Schemes with Rf Deflectors
In the paper we illustrate some possible injection/extraction schemes in the Damping Ring of TESLA using RF deflectors. We illustrate different possible solutions using 2 or 3 RF frequencies in 2, 4 or 6 RF deflector groups both considering the bunches modeled as macro-particles without a finite length and considering a finite bunch length. We discuss, finally, the effects of the errors in the ...
متن کاملOptical Layout of the TESLA 5 GeV Damping Ring
The TESLA linear collider needs damping rings to achieve the required small transverse emittances for optimum luminosity. Due to the TESLA pulse structure the damping rings are about 17 km long. The resulting unusual ratio of circumference to energy leads to a large space charge tune shift. The originally proposed damping ring [1] has thus been redesigned for higher energy. This paper describes...
متن کاملNew Approach to Design of Sc Nlc
We analyze here possibility for increase of repetition rate for the Next Linear Collider with SC structures up to 50 Hz simultaneously with decreasing the bunch train length. SC structure operating at SLAC frequency 2856 MHz and Tesla-type structures operating at 1300 MHz discussed here. We did not find any technical restrictions for realization of this transferring. Advantages are in relaxed p...
متن کاملA Permanent Magnet Wiggler Design for the TESLA Damping Ring
The TESLA Linear Collider requires damping rings equipped with long wigglers in order to reduce the beam emittance before the particles are injected into the main linac. We propose a compact permanent magnet wiggler which will be installed in the straight sections of the damping ring. The concept discusses the magnetic design and field distribution; a damping integral ID ~ 1.37 T m per meter wi...
متن کاملElectron Cloud Effect in Damping Rings of Linear Colliders
Design of Linear Collider projects are in progress as a world wide collaboration. There are two possibility for the linear collider scheme: one is normal conducting cavity with X/C band power source, and another is superconducting cavity with L band power source. A positron damping ring storages positron beam during several damping time and extracts the beam with a very low emittance to a main ...
متن کامل