Thermodynamic and Structural Properties of Ball-milled Mixtures Composed of Nano-Structural Graphite and Alkali(-Earth) Metal Hydride
نویسنده
چکیده
Hydrogen desorption properties of mechanically milled materials composed of nano-structural hydrogenated-graphite (CHx) and alkali(-earth) metal hydride (MH; M = Na, Mg and Ca) were investigated from the thermodynamic and structural points of view. The hydrogen desorption temperature for all the CHx and MH composites was obviously lower than that of the corresponding each hydride. In addition, the desorption of hydrocarbons from CHx was significantly suppressed by making composite of CHx with MH, even though CHx itself thermally desorbs a considerably large amount of hydrocarbons. These results indicate that an interaction exists between CHx and MH, and hydrogen in both the phases is destabilized by a close contact between polar C-H groups in CHx and the MH solid phase. Moreover, a new type of chemical bonding between the nano-structural carbon (C) and the Li, Ca, or Mg metal atoms may be formed after hydrogen desorption. Thus, the above metal-C-H system would be recognized as a new family of H-storage materials. *Corresponding author: T. Ichikawa, E-mail: [email protected], Phone & Fax:
منابع مشابه
Isolation and Structural Characterization of Alkali and Alkaline Earth Metal Salts with Synthetic Non Cyclic Ionophores
In the present study, an investigation on the complex formation between mono- and divalent metal ions (Na+, K+, Li+ and Mg2+) in the form of salt with different podands using various solvents has been carried out. Isolated complexes were characterized by different spectroscopic techniques viz. IR, NMR and elemental analysis. On the basis of ...
متن کاملPreparation and characterization of hydroxyapatite reinforced with hardystonite as a novel bio-nanocomposite for tissue engineering
Objecttive(s): Despite the poor mechanical properties of hydroxyapatite, its unique biological properties leads we think about study on improving its properties rather than completely replacing it with other biomaterials. Accordingly, in this study we introduced hydroxyapatite reinforced with hardystonite as a novel bio-nanocompositeand evaluate its in-vitro bioactivity with the aim of developi...
متن کاملNano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry
Mechanical alloying of binary and ternary elemental powder mixtures with the nominal compositions of Mg2Ni and Mg(2-x)MnxNi (x= 0, 0.05, 0.10 and 0.15 at. %) were carried out in a planetary ball mill for various milling times of 5, 10, 15, 20, 30 and 60 h. X-ray diffraction and field emission scanning and transmission electron microscopy were used for the characterization of the milled products...
متن کاملWear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering
The effect of CaO on the formation of β- and γ-zirconia nanoparticles from α-zirconia was investigated and their stability evaluated via mechanical activation. α-ZrO2+8.5wt%CaO powder was milled for 2-150 hours with ball-to-powder weight ratios (BPWR) of 40:1 and 60:1. Structural evaluations were conducted using X-Ray diffraction and scanning electron microscope (SEM). Thermal analysis wa...
متن کاملStructural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages
Production of nanostructured aluminum matrix composite powder by high energy ball milling is investigated. Scanning electron microscopy analysis as well as the tap and green density measurements were used to optimize the milling time needed for the completion of the mechanical milling process. Also, we studied the particles morphology and size distribution change with milling time and its corre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006