Technical Problem Identification for the Failures of the Liberty Ships
نویسندگان
چکیده
The U.S. Liberty Ship Building Program in World War II set a record—a total of 2700 Liberty Ships were built in 6 years, in order to support the battle against Nazi-Germany. However, numerous vessels suffered sudden fracture, some of them being split in half. This paper demonstrates and investigation of the Liberty Ships failure and problems, which reveals that the failures are caused by a combination of three factors. The welds produced by largely unskilled work force contain crack type flaws. Beyond these cracks, another important reason for failure associated with welding is the hydrogen embitterment; most of the fractures initiate at deck square hatch corners where there is a stress concentration; and the ship steel has fairly poor Charpy-Impact tested fracture toughness. It has been admitted that, although the numerous catastrophic failures were a painful experience, the failures of the Liberty Ships caused significant progress in the study of fracture mechanics. Considering their effect, the Liberty Ships are still a success.
منابع مشابه
Technical Note: An opportunity cost maintenance scheduling framework for a fleet of ships: A case study
The conventional method towards deriving schedule for a fleet of ships to minimize cost alone has the short-coming of not addressing the problem of operation revenue losses associated with delays during maintenance at ships dockyards. In this paper, a preventive maintenance schedule for a fleet of ships that incorporates op-portunity cost is presented. The idea is to assign a penalty cost to al...
متن کاملOptimal Allocation of Ships to Quay Length in Container Ports
Due to the continuously increasing container trade, many terminals are presently operating at or close to capacity. An efficient terminal is one that facilitates the quick transshipment of containers to and from ships. In this sake, this paper addresses the ship assignments problem at a maritime container terminal, where ships are normally assigned to specific quay cranes until the work is fini...
متن کاملON A FUZZY APPLICATION OF THE PARTICULATE MATTERS ESTIMATION
The Bosphorus (Istanbul Strait) that connects the continents of Europe and Asia is too complex due to geographical conditions and have a continuously increasing maritime traffic. The length of the Bosphorus which connect the Black Sea and the Marmara Sea is 29.9 km. The number of ships (Tanker, general Cargo and bulk carrier) passing through the Istanbul strait was recorded as 42553 in 2016 an...
متن کاملSecond Generation IMO Intact Stability Vulnerability Criteria and its Application to ships Navigating in Persian Gulf and Oman Sea
Second generation intact stability criteria for few past years had been under development by International Maritime Organization (IMO). Since the draft proposed amendments shall be amended to International code on Intact Stability (IS code 2008), new regulations shall enter into force for ships of length more than 24 meter. Generally second generation intact stability criteria (SGISC) refers to...
متن کاملA New Method for Detecting Ships in Low Size and Low Contrast Marine Images: Using Deep Stacked Extreme Learning Machines
Detecting ships in marine images is an essential problem in maritime surveillance systems. Although several types of deep neural networks have almost ubiquitously used for this purpose, but the performance of such networks greatly drops when they are exposed to low size and low contrast images which have been captured by passive monitoring systems. On the other hand factors such as sea waves, c...
متن کامل