Variable Structure Sliding Mode Control and Direct Torque Control of Wind Power Generation System Based on the Pm Synchronous Generator
نویسندگان
چکیده
This paper presents a Variable Structure Sliding Mode Control (VS-SMC) scheme and Direct Torque Control (DTC) for Wind Farm (WF) based on the Permanent Magnet Synchronous Generator (PMSG). The WF consists of a 3 PMSGs which are connected to a common dc bus system with rectifier. The dc-bus is connected to the electrical network using only one inverter system, a grid-side filter as well as the transformer. The efficiency of the WF can be greatly improved using an appropriate control approach. So, the control strategy uses the technique of DTC to regulate the speeds of PMSGs for Maximum Power Point Tracking (MPPT) mode. Besides, by employing VS-SMC the grid-side inverter is controlled to inject the generated power into the electrical network, to regulate DC-link voltage and to achieve Unity Power Factor. The used control strategies provide an optimal control solution for WF systems based on the PMSG.
منابع مشابه
Sliding-Mode-based Improved Direct Active and Reactive Power Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage Condition
This paper proposes an improved direct active and reactive power control (DPC) strategy for a grid-connected doubly fed induction generator (DFIG) based wind-turbine system under unbalanced grid voltage condition. The method produces required rotor voltage references based on the sliding mode control (SMC) approach in stationary reference frame, without the requirement of synchronous coordinate...
متن کاملOptimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System
In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...
متن کاملImprovement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC
This paper deals with the Active and Reactive Power control of double-fed induction generator (DFIG) for variable speed wind turbine. For controlling separately the active and the reactive power generated by a DFIG, field oriented control (FOC) and indirect sliding mode control (ISMC) are presented. These non linear controls are compared on the basis of topology, cost, efficiency. The main cont...
متن کاملIntelligent Control for the Variable-Speed Variable-Pitch Wind Energy System
In this paper, a new type of multi-variable compensation control method for the wind energy conversion systems (WECS) is presented. Based on wind energy conversion systems, combining artificial neural network (ANN) control and PID, a new type of PID NN intelligent controller for steady state torque of the wind generator is designed, by which the steady state torque output is regulated to track ...
متن کاملModeling, Simulation and Control of Matrix Convert for Variable Speed Wind Turbine System
This paper presents modeling, simulation and control of matrix converter (MC) for variable speed wind turbine (VSWT) system including permanent magnet synchronous generator (PMSG). At a given wind velocity, the power available from a wind turbine is a function of its shaft speed. In order to track maximum power, the MC adjusts the PMSG shaft speed.The proposed control system allowing independen...
متن کامل