Paint Curing By Infrared Catalytic Thermoreactors
ثبت نشده
چکیده
The standard method of curing industrial coatings has been accomplished by slow open air drying or somewhat faster gas heated convection air ovens. Electric infrared has also been used for curing paints for certain applications. While enhancing the rate of cure, the energy costs become excessive to operate. The introduction of gas fueled infrared catalytic thermoreactors is changing the way industry is curing organic coatings as the following account describes.
منابع مشابه
Designing Continuous Radiation Ovens Using Gradient Optimization Technique
Continuous radiation ovens are of widely used apparatuses in paint cure and coating industries. The most important issue that guarantee the quality of paint curing is suitable thermal condition. Designing of these ovens for curing paint on bodies of complex geometries has become a challenge for many years. In the present study a new designing approach is introduced and advised because of its ac...
متن کاملEffect of Hyperbranched Polyesters on HTPB Polyurethane Curing Kinetic
Effects of hyperbranched polyesters on kinetics of the reaction between hydroxyl-terminated polybutadiene (HTPB) and isophorone diisocyanate (IPDI) were investigated. HTPB and IPDI were in-situ cured in the presence of two different hyperbranched polyesters, stearic acid ester-terminated hyperbranched polyester (SHPE) and acetate-terminated hyperbranched polyester (AHPE). The curing processes w...
متن کاملIdentification of a tiny, thin and smeared dot of red paint in a fatal traffic accident case by Fourier transform-infrared microspectroscopy
Fourier transform-infrared microspectroscopy (micro-FT-IR) operated in attenuated-total-reflectance (ATR) and transmission modes following stereomicroscopy was used for the purpose of matching known and questioned paint samples in a fatal hit-and-run case. A tiny, thin and smeared dot of red paint sticking on the broken-off cross section of a side-mirror rod was taken from the victim motorcycle...
متن کاملAnticorrosive Performance of Polyester–melamine Coating Fortified with Zinc Ferrite Nanoparticles
In this study, nanoparticle zinc ferrites with different particle sizes were synthesized via sol-gel method using ferric nitrate and zinc nitrate. The obtained gel was dried and calcined at three different temperatures (i.e. 500, 600 and 800 °C) for 2 h. Adequate amounts of the as-synthesized nanoparticle samples were then added to the mixture of polyester resin and formaldehyde resin. The ...
متن کاملCatalytic behavior of Sn/Bi metal powder in anhydride-based epoxy curing.
In this paper, we report the catalytic activity of the Sn/Bi alloy beads and its acceleration of the exothermic epoxy curing reactions in various thermal conditions and bead compositions. As being used as low-melting solder balls in electronic interconnection processes with various epoxy systems, it was found that the Sn/Bi beads substantially lowered the exothermic peak temperature of the digl...
متن کامل