Efficient nitrogen incorporation in ZnO nanowires
نویسندگان
چکیده
One-dimensional ZnO nanowires (NWs) are a promising materials system for a variety of applications. Utilization of ZnO, however, requires a good understanding and control of material properties that are largely affected by intrinsic defects and contaminants. In this work we provide experimental evidence for unintentional incorporation of nitrogen in ZnO NWs grown by rapid thermal chemical vapor deposition, from electron paramagnetic resonance spectroscopy. The incorporated nitrogen atoms are concluded to mainly reside at oxygen sites (NO). The NO centers are suggested to be located in proximity to the NW surface, based on their reduced optical ionization energy as compared with that in bulk. This implies a lower defect formation energy at the NW surface as compared with its bulk value, consistent with theoretical predictions. The revealed facilitated incorporation of nitrogen in ZnO nanostructures may be advantageous for realizing p-type conducting ZnO via N doping. The awareness of this process can also help to prevent such unintentional doping in structures with desired n-type conductivity.
منابع مشابه
Synthesis and characterization of Ag-doped p-type ZnO nanowires
P-type ZnO nanowires with silver (Ag) doping were synthesized via a chemical vapor deposition process. The incorporation of Ag was confirmed by selected-area energy-dispersive x-ray spectroscopy. The formation of acceptor states was demonstrated by temperature and excitation power-dependent photoluminescence measurements. Characterization of field-effect transistors using Ag-doped ZnO nanowires...
متن کاملZnO p–n Homojunction Random Laser Diode Based on Nitrogen-Doped p-type Nanowires
An electrically pumped ZnO homojunction random laser diode based on nitrogen-doped p-type ZnO nanowires is reported. Nitrogen-doped ZnO nanowires are grown on a ZnO thin fi lm on a silicon substrate by chemical vapor deposition without using any metal catalyst. The p-type behavior is studied by output characteristics and transfer characteristic of the nanowire back-gated fi eld-effect transisto...
متن کاملEffective control of photoluminescence from ZnO nanowires by a-SiNx:H decoration.
The a-SiNx:H with a large bandgap of 3.8 eV was utilized to decorate ZnO nanowires. The UV emission from the a-SiNx:H-decorated ZnO nanowires are greatly enhanced compared with the undecorated ZnO nanowire. The deep-level defect emission has been completely suppressed even though the sample was annealed at temperatures up to 400 °C. The incorporation of H and N is suggested to passivate the def...
متن کاملFunctionalised zinc oxide nanowire gas sensors: Enhanced NO2 gas sensor response by chemical modification of nanowire surfaces
Surface coating with an organic self-assembled monolayer (SAM) can enhance surface reactions or the absorption of specific gases and hence improve the response of a metal oxide (MOx) sensor toward particular target gases in the environment. In this study the effect of an adsorbed organic layer on the dynamic response of zinc oxide nanowire gas sensors was investigated. The effect of ZnO surface...
متن کاملSupporting information for manuscript “Influence of ZnO nanowire array morphology on field emission characteristics” by S, Garry et al. Sample preparation
ZnO buffer layer Silicon substrates with (100) orientation were coated with a ZnO buffer layer in order to initiate ZnO nanowire growth and to ensure c-axis alignment. No attempt was made to remove the substrate native oxide layer in any case. Firstly a ZnO seed layer is deposited by drop coating a 5 mM solution of zinc acetate in absolute ethanol [1]. 3.5 μl of this solution is applied per cm ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 5 شماره
صفحات -
تاریخ انتشار 2015