36.5: Application of MEMS for Improved Emitter Location Accuracy
نویسندگان
چکیده
This paper considers the problem of locating a stationary radar emitter from a single airborne platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the location accuracy is most sensitive to aperture velocity uncertainty and that location accuracy can be improved by using a MEMS accelerometer at the aperture A decentralized method is developed for estimating the aperture velocity that integrates the on-board navigation data, the MEMS data, and Doppler shifts of any aperture-acquired GPS signals. An upper bound is given that shows the potential for significant location accuracy enhancement.
منابع مشابه
Simulation and Derivation of Deflection Equation for Suspended Diaphragm for MEMS Application Using Kirchhoff-Love Theory
In this paper, using theory of sheets, the deflection of suspended diaphragm has been obtained under uniform and circular loading. This type of diaphragm, unlike other diaphragms, has a central support which is recommended to be used in MEMS applications. The relationship between diaphragm deflection and static analysis of this diaphragm enjoys a great significance in investigating and understa...
متن کاملSample manuscript showing specifications and style
The Complex Ambiguity Function (CAF) used in emitter location measurement is a 2-dimensional complex-valued function of time-difference-of-arrival (TDOA) and frequency-difference-of-arrival (FDOA). In classical TDOA/FDOA systems, pairs of sensors share data (using compression) to compute the CAF, which is then used to estimate the TDOA/FDOA for each pair; the sets of TDOA/FDOA measurements are ...
متن کاملMagnetic Calibration of Three-Axis Strapdown Magnetometers for Applications in Mems Attitude-Heading Reference Systems
In a strapdown magnetic compass, heading angle is estimated using the Earth's magnetic field measured by Three-Axis Magnetometers (TAM). However, due to several inevitable errors in the magnetic system, such as sensitivity errors, non-orthogonal and misalignment errors, hard iron and soft iron errors, measurement noises and local magnetic fields, there are large error between the magnetometers'...
متن کاملCalibration of MEMS Accelerometer Based on Kalman Filter and the Improved Six Position Method
—The measurement precision of Micro Electronic Mechanical System (MEMS) accelerometer are influenced by zero drift, scale factor and installation error. In order to increase the measurement accuracy of the MEMS accelerometer, an improved calibration method is proposed on the basis of traditional six position method. The raw measurements of the MEMS accelerometer not divided by the scale factor...
متن کاملResearch on the Temperature Compensation Algorithm of Zero Drift in MEMS Gyroscope Based on Wavelet Transform and Improved Grey Theory
The MEMS gyroscope zero drifts dominantly affects measurement accuracy of gyroscope. For the nonlinear problem that MEMS gyro zero drift varying with the temperature changes, the wavelet transform was performed to filter the static experiment zero drift data, then the zero drift was investigate by combing with the improved grey prediction theory. Finally a temperature compensation model based o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002