A low cost, green method to synthesize GaN nanowires
نویسندگان
چکیده
The synthesis of gallium nitride nanowires (GaN NWs) by plasma enhanced chemical vapor deposition (PECVD) are successfully demonstrated in this work. The simple and green synthesis route is to introduce gallium oxide (Ga2O3) and nitrogen (N2) for the growth of nanowires. The prepared GaN nanowires have a single crystalline wurtzite structure, which the length of some nanowires is up to 20 μm, with a maximum diameter about 140 nm. The morphology and quantity of the nanowires can be modulated by the growth substrate and process parameters. In addition, the photoluminescence and field emission properties of the prepared GaN nanowires have been investigated, which were found to be largely affected by their structures. This work renders an environmentally benign strategy and a facile approach for controllable structures on nanodevice.
منابع مشابه
Synthesis of Serrated GaN Nanowires for Hydrogen Gas Sensors Applications by Plasma-Assisted Vapor Phase Deposition Method
Nowadays, the semiconductor nanowires (NWs) typically used in hydrogen gas sensors. Gallium nitride (GaN) with a wide band gap of 3.4 eV, is one of the best semiconductors for this function. NWs surface roughness have important role in gas sensors performance. In this research, GaN NWs have been synthesized on Si substrate by plasma-assisted vapor phase deposition at different deposition time, ...
متن کاملGreen Method for Synthesizing Gallium Nitride Nanostructures at Low Temperature
Gallium nitride (GaN) nanostructures (NS) were synthesized using pulseddirect current plasma enhanced chemical vapor deposition (PDC-PECVD) on quartzsubstrate at low temperature (600°C). Gallium metal (Ga) and nitrogen (N) plasma wereused as precursors. The morphology and structure of the grown GaN NS werecharacterized by field emission scanning electron microscope (FE-SEM), transmissionelectro...
متن کاملImproving Gas Sensing Properties of Tin Oxide Nanowires Palladium-Coated Using a Low Cost Technique
Thin films of SnO2 nanowires were successfully prepared by using chemical vapor deposition (CVD) process on quartz substrates. Afterwards, a thin layer of palladium (Pd) as a catalyst was coated on top of nanowires. For the deposition of Pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors...
متن کاملRapid Communications Strong piezoelectricity in individual GaN nanowires
GaN nanowires are promising building blocks for future nanoelectronics, optoelectronic devices, and nanogenerators. Here, we report on strong piezoelectricity in individual single-crystal GaN nanowires revealed by direct measurement of the piezoelectric constant using piezoresponse force microscopy. Our experimental results show that individual c-axis GaN nanowires, with a characteristic dimens...
متن کاملGaN and InGaN Nanowires on Si Substrates by Ga-Droplet Molecular Beam Epitaxy
Molecular beam epitaxy growth of GaN and InGaN nanowires is accomplished on Si (111) substrates using Ga-droplet nucleation. Typical diameters range from 25-80 nm and lengths can be varied by increasing the growth time; the growth rate is ~0.25 microns/hour. The nanowires have been characterized structurally and optically. Photoluminescence spectra show band-edge emission of GaN nanowires cente...
متن کامل