Friction Surface Cladding FRICTION SURFACE CLADDING DEVELOPMENT OF A SOLID STATE CLADDING PROCESS
نویسنده
چکیده
منابع مشابه
Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351
Friction Surfacing Cladding (FSC) is a relatively new solid state process to deposit thin metallic clad layers on substrates. It employs a hollow rotating tool that supplies the clad material. Frictional and viscous heating take place that soften the clad material and enhance the bonding of the clad material to the substrate. Thin layers of commercially pure aluminium can be deposited well on a...
متن کاملPunch plastic deformation pipe cladding (PPDPC) as a novel tube cladding method
This study presents a new mechanical tube cladding process named punch plastic deformation pipe cladding (PPDPC) based on local deformation by pressing a punch into the inner layer of the bimetal tube. To investigate the capability of the process, stainless steel tube (as the inner layer) is bonded to a carbon steel pipe (as the outer layer) to fabricate a bimetal pipe. Shear punch tests were u...
متن کاملApplication of Friction Stir Processing (FSP) as a Cladding Method to Produce AA2024-AA1050 Multi-layer Sheets
Friction stir processing (FSP) was used as a cladding method for the fabrication of a AA2024 clad layer on a AA1050 sheet. Crossover multi pass FSP with 50% overlap was considered as the cladding method. Effects of the number of FSP passes and post heat treatment on the microstructure and properties of clad layers were evaluated. Microstructural evolutions during the FSP and heat treatment were...
متن کاملThermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness
Friction Surfacing Cladding (FSC) is a recently developed, solid-state process to deposit thin metallic clad layers on a substrate. The process employs a hollow rotating tool containing the clad material. The tool is moved along a predefined trajectory at a given distance above the substrate surface while the clad material is pressed out and deposited on the substrate surface beneath the tool. ...
متن کاملPerformance evaluation of a semi-active cladding connection for multi-hazard mitigation
A novel semi-active damping device termed Variable Friction Cladding Connection (VFCC) has been previously proposed to leverage cladding systems for the mitigation of natural and man-made hazards. The VFCC is a semi-active friction damper that connects cladding elements to the structural system. The friction force is generated by sliding plates and varied using an actuator through a system of a...
متن کامل