A Practical Anodic and Cathodic Curve Intersection Model to Understand Multiple Corrosion Potentials of Fe-Based Glassy Alloys in OH- Contained Solutions
نویسندگان
چکیده
A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curve and an imaginary cathodic line, was proposed to explain multiple corrosion potentials occurred in potentiodynamic polarization curves of Fe-based glassy alloys in alkaline solution. The apparent anodic curve was selected from the measured anodic curves. The imaginary cathodic line was obtained by linearly fitting the differences of anodic curves and can be moved evenly or rotated to predict the number and value of corrosion potentials.
منابع مشابه
Effect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy
In this study, a wide range of combined ageing treatments and cold work deformations in the Al 4.2 wt% Ag alloy matrix were proposed, aiming to investigate the effect of defects such as precipitates (Ag2Al plates) and dislocations on the mechanical and electrochemical behavior of Al–4.2 wt% Ag alloys. Further reductions of thickness from 10 to 60%, decreases the mean size of Ag2...
متن کاملEFFECT OF ANODIC OXIDATION ON THE CORROSION BEHAVIOR OF NICKEL-TITANIUM SHAPE MEMORY ALLOYS IN SIMULATED BODY FLUIDS (SBF)
The effect of anodic oxidation of a NiTi shape memory alloy in sulfuric acid electrolyte on its surface characteristics was studied. Surface roughness was measured by roughness tester. Surface morphology was studied using optical microscopy (OM) and scanning electron microscopy (SEM). Corrosion behavior was specified by recording Potentiodynamic polarization cur...
متن کاملInfluence of the sliding velocity and the applied potential on the corrosion and wear behavior of HC CoCrMo biomedical alloy in simulated body fluids.
The corrosion and tribocorrosion behavior of an as-cast high carbon CoCrMo alloy immersed in phosphate buffered solution (PBS) and phosphate buffered solution with bovine serum albumin (PBS+BSA) have been analyzed by electrochemical techniques and surface microscopy. After the electrochemical characterization of the alloy in both solutions, the sample was studied tribo-electrochemically (by ope...
متن کاملDealloying and Stress Corrosion Craking of Copper Alloys in Cu(I) Solutions
Natural cases of dealloying or stress-corrosion cracking in copper alloys normally occur in oxygenated solutions, where the cathodic reactant is O2 or Cu2+. Within cavities or under deposits, the local environment is enriched in cuprous ions (e.g. CuCl2-, Cu (NH3)2+) and the potential is close to the Cu/Cu+ equilibrium. Such conditions can be simulated macroscopically by stirring powdered Cu2O ...
متن کاملCorrosion Behavior of a Fe-25at%Sn Supersaturated Solid Solution in H3PO4 Solution
Corrosion resistance of iron can be drastically improved by addition of passivating alloying elements. A supersaturated solid solution of Fe-25at%Sn was produced by mechanical alloying of commercially pure iron and tin powders for 24 hours using a planetary ball mill. Electrochemical measurements were performed on cold compacted unsintered specimens.. XRD investigation on produced alloy showed ...
متن کامل