Effect of vegetable oil (Brazil nut oil) and mineral oil (liquid petrolatum) on dental biofilm control.

نویسندگان

  • Cíntia de Fátima Buldrini Filogônio
  • Rodrigo Villamarim Soares
  • Martinho Campolina Rebello Horta
  • Cláudia Valéria de Sousa Resende Penido
  • Roberval de Almeida Cruz
چکیده

Dental biofilm control represents a basic procedure to prevent caries and the occurrence of periodontal diseases. Currently, toothbrushes and dentifrices are used almost universally, and the employment of good oral hygiene allows for appropriate biofilm removal by both mechanical and chemical control. The aim of this study was to evaluate the effectiveness of adding vegetable or mineral oil to a commercially available dentifrice in dental biofilm control. A comparison using the Oral Hygiene Index Simplified (OHI-S) was performed in 30 individuals who were randomly divided into three groups. Group 1 (G1) received a commercially available dentifrice; the composition of this dentifrice was modified by addition of mineral oil (Nujol®) for group 2 (G2) or a vegetable oil (Alpha Care®) for group 3 (G3) at 10% of the total volume, respectively. The two-way repeated-measures analysis of variance (two-way ANOVA) was used to test the effect of group (G1, G2 and G3) or time (baseline, 45 days and 90 days) on the OHI-S index scores. Statistical analysis revealed a significant reduction in the OHI-S at day 90 in G2 (p < 0.05) and G3 (p < 0.0001) in comparison to G1. Therefore, the addition of a vegetable or a mineral oil to a commercially available dentifrice improved dental biofilm control, suggesting that these oils may aid in the prevention and/or control of caries and periodontal disease.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Investigation on Vegetable Oils as Potential Insulating Liquid

While choosing insulating oil, characteristic features such as thermal cooling, endurance, efficiency and being environment-friendly should be considered. Mineral oils are referred as petroleum-based oil. In this study, vegetable oils investigated as an alternative insulating liquid to mineral oil. Dissipation factor, breakdown voltage, relative dielectric constant and resistivity changes with ...

متن کامل

Lipid uptake and skin occlusion following topical application of oils on adult and infant skin.

BACKGROUND Topical application of oils and oil-based formulations is common practice in skin care for both adults and infants. Only limited knowledge however is available regarding skin penetration and occlusive potential of oils and common methods for measuring skin moisturization fall short when it comes to the moisturizing effect of oils. OBJECTIVE In this study we used in vivo confocal Ra...

متن کامل

C146-E310 Technical Report: Determination of Mineral Oil Saturated and Aromatic Hydrocarbons in Edible Oil by Liquid-liquid-gas Chromatography with Dual Detection

Nowadays, food contamination by mineral oil (MO) is a very important issue and its presence in edible oils is widely documented. Mineral oils are hydrocarbons mixture of petrochemical origin containing mainly two families of compounds, namely mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). The most used approach for mineral oil analysis is liquid chromato...

متن کامل

Influence of Copper Particles on Breakdown Voltage and Frequency-Dependent Dielectric Property of Vegetable Insulating Oil

The insulating performance of oil is vulnerable to particles especially the conductive particles. This paper investigated the influence of copper particles of micrometer size on the breakdown strength and frequency-dependent properties of vegetable oil. The AC breakdown voltage of contaminated vegetable oil with copper particles of different numbers (ranging from 103 to 106) was measured. The f...

متن کامل

An Experimental Investigation towards Multi Objective Optimization during Hard Turning of Tool Steel Using a Novel MCDM Technique

Environmental and Ecological issues call for the reduction in usage of cutting fluids in metal cutting industry. New techniques are being inquired to achieve this objective. Hard turning with minimum quantity lubrication is one such technique which can alleviate the pollution problems associated with cutting fluids. In the present work, vegetable oil based cutting fluids like castor oil, palm o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Brazilian oral research

دوره 25 6  شماره 

صفحات  -

تاریخ انتشار 2011